IF THE
DISHW’HER
IS NOT
OPERATING
PROPERLY...
Check these points:
l Is the door closed tightly and latched securely?
l Has the cycle been set correctly to start the dishwasher?
l Is the water turned on?
lHas a house fuse blown?
l Has electrical power been interrupted?
Note: If the motor has stopped because of overload. it will
automatically reset itself within a few minutes. If after checking these points the dishwasher still does not run or complete a cycle, call for service.
ROPER
‘OrI No. 3369941 |
|
|
al989 Whirlpod Corporutim | Prepared by Whirlpool Corwmticm. Ekntcm Honbor. Michigan 49022 | Printed in U.S.A. |
