Roper FGS326R dimensions Freestanding Gas Range, Product Model Numbers, Overall Dimensions, Hi J

30" Freestanding Gas Range

PRODUCT MODEL NUMBERS

FGS326R

Gas supply: Use 3/4" rigid pipe gas supply line to the range location. A smaller size pipe on long runs may result in insufficient gas supply. With L.P. gas, piping or tubing size can be 1/2" minimum. If local codes permit, a new CSA design-certified, 4 - 5 ft (122 - 152.4 cm) long, 1/2" (1.3 cm) or 3/4" (1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line. A 1/2" male pipe thread is needed for connection to pressure regulator female pipe threads. An easily accessible individual manual shutoff valve must be located in the same room, but external to the range.

Electrical: 120-volt, 60 Hz, AC-only, 15 amp, fused electrical circuit is required. A separate circuit is recommended. A time-delay fuse or circuit breaker is recommended.

CABINET OPENING DIMENSIONS

OVERALL DIMENSIONS

A

B C

E

D

A. 27¹⁄₈" (68.9 cm) depth with handle

B. 36" (91.4 cm) cooktop height

C. 46⁷⁄₈" (119.1 cm) overall height

D. 29⁷⁄₈" (75.9 cm) width

E. 25" (63.5 cm)

A

K

B

C

E

G

D

F

A. 18" (45.7 cm) upper side cabinet to countertop B. 13" (33 cm) max. upper cabinet depth

C. 30" (76.2 cm) min. opening width

D. For minimum clearance to top of cooktop, see NOTE* E. 30¹⁄₈" (76.5 cm) min. opening width

F. This shaded area recommended for installation of rigid gas pipe

G. 8" (20.3 cm)

G

I

HI

J

H. 17" (43.2 cm)
I. 4¹⁄₂" (11.4 cm)
J. 2"	(5.1 cm)
K. 2"	(5.0 cm) min. clearance from both sides of range to side wall
or other combustible material.

*NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is protected by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 9758657
Instructions packed with product. Specifications subject to change without notice.	02-03-06