Do not clean the dishwasher interior until it has cooled. Wear rubber gloves. Do not use any type of cleanser other than dishwasher detergent because it may cause foaming or sudsing.

To clean interior

Make a paste with powdered dishwasher detergent on a damp sponge and clean.

OR

Use liquid automatic dishwasher detergent and clean with a damp sponge.

OR

See the vinegar rinse procedure in “Spotting and filming on dishes” in “Troubleshooting.”

NOTE: Run a Wash or Normal Wash cycle with detergent after cleaning the interior.

Cleaning the Filter Screen

The filter system requires periodic cleaning as needed.

To clean screen

1.Unload the bottom rack. Slide the rack forward or remove the rack to reach the filter screen.

2.Remove collected particles from the screen with your fingers or a paper towel.

3.Replace the bottom rack with the rack bumpers facing the door.

NOTE: Do not clean the dishwasher interior until it has cooled.

Drain Air Gap

Check the drain air gap anytime your dishwasher isn’t draining well.

Some state or local plumbing codes require the addition of a drain air gap between a built-in dishwasher and the home drain system. If a drain is clogged, the drain air gap protects your dishwasher from water backing up into it.

The drain air gap is usually located on top of the sink or countertop near the dishwasher. To order a drain air gap contact your local dealer, or in the U.S.A., call the Customer Interaction Center and ask for Part Number 300096.

NOTE: The drain air gap is an external plumbing device that is not part of your dishwasher. The warranty provided with your dishwasher does not cover service costs directly associated with the cleaning or repair of the external drain air gap.

To clean the drain air gap

Clean the drain air gap periodically to ensure proper drainage of your dishwasher. Follow the cleaning instructions provided by the manufacturer. With most types, you lift off the chrome cover.

Unscrew the plastic cap. Then check for any soil buildup. Clean if necessary.

Storing

Storing for the summer

Protect your dishwasher during the summer months by turning off the water supply and power supply to the dishwasher.

Winterizing your dishwasher

Protect your dishwasher and home against water damage due to freezing water lines. If your dishwasher is left in a seasonal dwelling or could be exposed to near freezing temperatures, have your dishwasher winterized by authorized service personnel.

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid

the cost of a service call...

Dishwasher is not operating properly

Dishwasher does not run or stops during a cycle Is the door closed tightly and latched?

Is the right cycle selected? Refer to the “Cycle Selection Charts.”

Is there power to the dishwasher? Has a household fuse blown or circuit breaker tripped?

Has the motor stopped due to an overload? The motor automatically resets itself within a few minutes. If it does not restart, call for service.

Is the water shut-off valve (if installed) turned on?

Dishwasher will not fill

Is the overfill protection float able to move up and down freely? Press down to release.

Water remains in the dishwasher Is the cycle complete?

Detergent remains in the covered section of the dispenser

Is the cycle complete?

Is the detergent lump-free? Replace detergent if necessary.

Is the bottom rack installed properly with the bumpers in the front? Refer to the “Parts and Features” section. Reinstall the rack if necessary.

White residue on the front of the access panel

Was too much detergent used? Refer to the “Detergent Dispenser” section.

Is the brand of detergent making excess foam? Try a different brand to reduce foaming and eliminate buildup.

Odor in the dishwasher

Are dishes washed only every 2 or 3 days? Run a rinse cycle once or twice a day until you have a full load.

Does the dishwasher have a new plastic smell? Run a vinegar rinse as described in “Spotting and filming on dishes” later in this Troubleshooting guide.

13

Page 13
Image 13
Roper rud4000 manual Troubleshooting, Cleaning the Filter Screen, Drain Air Gap, Storing

rud4000 specifications

The Roper RUD4000 is an advanced piece of equipment designed to enhance efficiency and versatility in various industrial applications. It stands out in the market due to its exceptional features, cutting-edge technologies, and robust characteristics that cater to the demands of modern operations.

One of the key features of the RUD4000 is its powerful performance capability, driven by a high-performance engine that ensures optimum output even under heavy loads. With a commendable power-to-weight ratio, the RUD4000 excels in offering both efficiency and maneuverability, making it suitable for a wide range of tasks. Its ergonomic design allows for easy handling and operation, ensuring that operators can work comfortably over extended periods.

The RUD4000 integrates advanced technology for enhanced control and precision. The intuitive touchscreen interface allows users to customize settings and monitor performance metrics in real-time. This feature not only improves operational efficiency but also helps in identifying any potential issues before they escalate. The machine is equipped with state-of-the-art sensors that continuously assess performance and provide feedback to the operator, ensuring optimal functionality.

Safety is a top priority with the RUD4000. It is designed with multiple safety features, including automatic shut-off mechanisms and advanced braking systems. These features help prevent accidents and ensure a secure working environment, which is critical in industrial settings.

In terms of durability, the RUD4000 is constructed with high-quality materials that withstand harsh conditions. Its rugged build makes it resistant to wear and tear, reducing maintenance needs and operational downtime. This robustness is complemented by an efficient cooling system that prevents overheating, ensuring prolonged performance even during demanding tasks.

Moreover, the RUD4000 offers versatility with its ability to adapt to various attachments and tools, enabling it to tackle a diverse range of applications from material handling to construction projects. This adaptability enhances its value as a multifunctional equipment choice for businesses seeking to optimize their operations.

In summary, the Roper RUD4000 is a highly efficient, technologically advanced, and durable machinery option that addresses the needs of various industries. With its powerful performance, user-friendly interface, safety features, and versatility, it stands as a reliable choice for companies aiming to boost productivity and maintain high operational standards.