Rosewill R910E Preparing To Install The Optional Wall Mount Arm Not Included, Remove the base

R910E

Preparing To Install The Optional Wall Mount Arm (Not Included)

This monitor can be attached to a wall mounting arm or bracket you can purchase separately from Ergotron (www.ergotron.com). Turn the power OFF then dis-connect the cables from the monitor before performing the procedure below. Lay the monitor face down on a soft surface.

1.Remove wall mounting hole cover.

2.Remove the cable cover.

3.Remove the 4 screws holding the base to the back of the monitor.

4.Remove the base.

INSTALLATION INSTRUCTIONS (cont)

8