Rosewill RC-400 user manual How to deal with an exclamation point on Ethernet Host controller

Gigabit PCI Card RC400-LX User Manual

this card has not been inserted into the PCI slot correctly. Please insert

the card firmly into the PCI slot or try another slot.

How to deal with an exclamation point on Ethernet Host controller

1.Please shutdown your computer and move the card to another available slot then re-install Gigabit Ethernet PCI Card driver again.

2.Please point on this device then right-check on the mouse.

3.This exclamation point usually means there is a resource conflict between the Gigabit Ethernet PCI Card and another card in your system. Please move the card to another available slot. Restart your computer. Windows will then re-configure itself and re-assign resources. Check your device manager again. If the exclamation point is still there then repeat the process until it no longer appears.

I can not use Gigabit Ethernet transfer speed

1.Please affirm your Ethernet environment supporting Gigabit structure.

2.Please use CAT6 UTP/STP cable.

How to configure 10/100/1000Mbps Ethernet structure

Connect 10/100/1000Mbps Ethernet over unshielded twisted pair (UTP) cable. Gigabit Ethernet PCI card has the ability of automatic sensing and operating on either speed without manual reconfiguration.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

6