Rosewill RC-400 user manual For Windows Vista, Verify Driver Installation

Gigabit PCI Card RC400-LX User Manual

For Windows® Vista

In Windows® Vista, when the system is booted up it automatically detects the Gigabit Ethernet PCI Card and install the Gigabit Ethernet PCI Card with in-build drivers. Following is the procedures for upgrading Gigabit Ethernet PCI Card driver under Windows® Vista operating system.

1.Please insert the CD driver bound with Gigabit Ethernet PCI Card into your CD-ROM Drive.

2.At the Windows desktop click Start, then Run.

3.Type D:\ RC400-LX \setup.exe, then click OK. (Change D:\ to match your CD-ROM drive letter)

4.Follow the on-screen instructions to complete the instructions to complete the installation to complete the installation.

5.Restart Windows to complete the installation.

Verify Driver Installation

Click on the “Device Manager” tab in System Properties, which you access from the Windows Control Panel. You should see a “Realtek RTL8169/8110 Family Gigabit Ethernet NIC” (Windows® 2000/XP/Server 2003) or a “Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC (NDIS 6.0)” (Windows® Vista) installed under “Network adapters” item.

START > Control Panel > System > Device Manager

4