Rosewill RNG-406U user manual Getting Started, Hardware Installation, Driver Installation

USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual

Chapter 2: Getting Started

2.1 Hardware Installation

1.Plug the USB 3.0 to Gigabit Ethernet Adapter directly into an available USB 2.0 port (Recommend USB 3.0 port) on your computer.

2.Connect one end of your network cable into the RJ45 port of USB 3.0 to Gigabit Ethernet Adapter.

3.Connect the other end of the network cable into an available Ethernet port on your router, switch, or any other networking device.

2.2 Driver Installation

The following section shows you how to install the USB

3.0to Gigabit Ethernet Adapter driver on different operating systems.

Important! Do not connect the USB 3.0 to Gigabit

Ethernet to your PC before the install.

2.2.1 Installation for Windows XP / Vista / 7

1.Insert the provided CD into your disk drive. The CD-ROM will start automatically. The following screen will show up and please click “Install Driver”.

5