Wireless N Adapter RNX-N250UB User Manual
Encryption: Encryption type in use.
Network Type: Network type in use.
IP Address: IP address about current connection.
Sub Mask: Sub mask about current connection.
Default Gateway: Default gateway about current connection.
Link Speed: Show current transmit rate and receive rate.
Throughout: Display transmits and receive throughput in unit of Mbps.
Link Quality: Display connection quality based on signal strength and TX/RX
packet error rate.
Signal Strength 1: Receive signal strength 1, user can choose to display as
percentage or dBm format.
Signal Strength 2: Receive signal strength 2, user can choose to display as
percentage or dBm format.
Signal Strength 3: Receive signal strength 3, user can choose to display as
percentage or dBm format.
Noise Strength: Display the surrounding environment noise signal strength.
HT: Display current HT status in use, containing BW, GI, MCS, SNR0, and
SNR1 value.
4.1.3 Authentication and Security for Windows
The Security tab allows you to configure the authentication and encryption settings
such as: WEP, WPA, WPA-PSK, WPA2, LEAP, 802.1x with PEAP, PEAP
Authentication with EAP/TLS Smartcard, 802.1x with TTLS with
EAP-MD5, MS-CHAP, MS-CHAPv2, and 802.1x CA Server. Each security
option is described in detail below.
Figure 4-19
4.1.3.1 WEP Encryption
39