Wireless N Adapter RNX-N250UB User Manual
Show Password check box. If you want to make sure the accuracy of password you
type, click the Show Password box to check it.
The Link Status tab displays the current status of the wireless radio. The following
information is included in this tab, as the image depicts below.
Figure 4-32
Status : This indicates the state of the client. There are three options:
Associated: Indicates that the wireless client is connected to an Access Point (AP). The
BSSID is shown in the form of 12 HEX digits, which is the MAC address of the
AP.
Scanning: Indicates that the wireless client is searching for an AP in the area.
Disconnected: Indicates that there are no APs or clients in the area.
Current Channel: The operating frequency channel that the client is using
(infrastructure mode).
Link Speed: The current rate at which the client is transmitting and receiving.
Throughput (bytes/sec): Displays the Tx (transmit) and Rx (receive) kilo-bytes per
second.
Link Quality: In infrastructure mode, this bar displays the transmission quality between
an AP and a client. In Ad-hoc mode, this bar displays the transmission quality
between one client, and another.
52