Rosewill RSV-R26 Step 4 (type1) , Step 4 (type2)

Server RSV-R26 User Manual

Step 4 (type1)

Install the latches onto the front-side of the pillar of a rackmount cabinet.

Use M5 x 8L screws to

secure the L brackets onto

the latches (4 places).

Please align the screw

holes on the pillar with the

screw holes on the

brackets.

Attention:

1. Adjust the brackets according to the width of the cabinet.

2. Make sure to align the 2 slide rails on the rackmount and secure the brackets on to the

outer slide rails via screws.

3. Make sure that the 2 sliding rails are at the same height. ( The positions of the screw

holes must be identical as well.)

Step 4 (type2)

Install the latches onto the profile of the pillar of a rackmount cabinet.

Use M5

x

8L screws to secure the brackets

together with the latches to the cabinet

rackmount. The setup is similar to type 1

4

Contents

Main Server RSV-R26 User Manual A list of mounting parts Step 1 Take the sliding r ail apart by sliding out the center slide. Step 2 Step 3 Step 4 (type1) Install the latches onto the front-side of the pillar of a rackmount cabinet. Step 4 (type2) Install the latches onto the profile of the pillar of a rackmount cabinet. Step 5 Install the chassis with center slides to the cabinet by sliding into the outer slides.