Power Protection UPS RU103 | User Manual | |
|
|
|
7. USB Communication Port
The
information. Other brand(s) of battery please contact Rosewill.com.
Battery Name | Recycling inside the USA |
|
|
Vision Battery | |
|
|
First Power Battery | |
|
|
BB Battery | |
|
|
Installing software
Follow the on-screen instructions.
If autoplay is not enabled on the computer, please follow instructions below:
instructions.
8.Data /Phone/Fax Protection Connectors
9.“Surge Only” Outlets
Four Nema
protection only
10.“Battery & Surge” Outlets
Four Nema
surge protection.
11.AC Input Power Cord
Plug the AC power cord into your power source
12.Coax in :
TV/TNT/Satellite reception protection
13.Circuit Breaker (re-settable)
The button will protrude when the overload condition occurs. If the button
SPECIFICATIONS
Model | ||
|
| |
Capacity | 1500 VA / 900W | |
| ||
Nominal Input Voltage | 120 Vac | |
|
| |
Nominal Output Voltage | 120 Vac | |
|
| |
Automatic Voltage | ||
Regulation (AVR) | ||
| ||
Frequency | 50 / 60 Hz auto sensing | |
|
| |
Outlets | 8 Outlets (4 Battery Backup & Surge Protection; | |
4 Surge Protection only) | ||
| ||
Lighting / Surge Protection | 320 Joules | |
|
| |
Transfer time to Battery/AC | ||
|
| |
Battery Type | Maintenance free | |
|
| |
Battery Specification | (2)* 12V 9 Ah | |
|
| |
Typical Backup Time | ||
|
| |
LAN / Phone / Fax Protection | RJ11/45 | |
|
| |
Short Circuit Protection | Circuit Breaker | |
|
| |
Communication Port | USB | |
|
| |
Operation Temperature | ||
|
| |
Operation Relative Humidity | 0 to 95% | |
|
| |
Storage Temperature | ||
|
| |
Net Weight | 29.3 lb | |
|
| |
Dimensions (HxWxD) | 10.8 x 3.4 x 16.1 IN |
Specifications may change without prior notice.
protrudes, disconnect some
breaker by pushing the button inward.
14.Coax out:
TV/TNT/Satellite reception protection
INDICATOR TABLE
Status Indicators
The UPS provides both visual and audible status indicators. Visual indicators consist of three LEDs to represent the following conditions:
•On utility power operation
•On battery power operation
•UPS fault/alarm
LED and Alarm Indicator TableUPS Status | Green | Red LED | Yellow | Alarm | ||
|
| LED |
| LED |
| |
| Blink 1 |
| B1 | |||
AC mode | Normal | On | X | X | X | |
( on utility) |
|
|
|
|
| |
Self Low | On | Blink2 | X | B5 | ||
| ||||||
| battery |
|
|
|
| |
| overload | On | Blink2 | X | B2 | |
|
|
|
|
|
| |
DC mode | Normal | X | X | On | B1 | |
( on battery) | Low | X | X | Blink2 | B3 | |
| battery |
|
|
|
| |
| Overload | X | Blink2 | On | B2 | |
Short/Fault | mode | X | On | X | On | |
X | Blink2 | X | B4 |
* Blink 1 | : ON 0.5 seconds / OFF 1 seconds | |
* Blink 2 | : ON 0.25 seconds / OFF 0.25 seconds | |
* B1: 1 beep / 5 seconds: ON 0.25 seconds / OFF 4.75 seconds | ||
* B2: 1 beep / 0.5 seconds :ON 0.25 seconds / OFF 0.25 seconds | ||
* B3 | : 2 beeps / 5 seconds: ON 0.25 seconds / OFF 0.25 seconds 2 times, 4 seconds OFF | |
* B4 | : 3 beeps / 5 seconds: ON 0.25 seconds / OFF 0.25 seconds 3 times, 3.5 seconds OFF |
TROUBLESHOOTING
Symptom Possible CauseUPS will not turn The UPS is not
onconnected to the power source. Circuit Breaker has tripped.
UPS is making a | The “Battery Backup & | |
continuous | Surge Protection” | |
sound and the | outlets are overload. | |
“Overload” |
| |
indicator is on |
| |
UPS does not | The UPS battery is | |
provide | discharged due to a | |
expected | power outage and has | |
not recharged. | ||
runtime | ||
| ||
| loaded. | |
|
| |
UPS does not | The UPS circuit | |
power essential | breaker “tripped”. | |
equipment |
| |
during an outage |
|
| The battery has |
| reached the end of its |
| life. |
| Equipment plugged |
| into a Surge Only |
| outlet. |
Flashing | Internal UPS fault. |
Indicators |
|
Ensure the UPS is securely connected to an AC outlet.
Reduce the amount of equipment plugged into the “Battery Backup & Surge Protection” outlets of the UPS. Reset the circuit breaker by pushing it back in. Switch the UPS back on.
Turn off the UPS and reduce the amount of equipment connected to these outlets.
Charge the battery for 8 hours. The UPS runtime is reduced until the battery is fully charged.
Unplug
Disconnect
Plug equipment in
Replace the battery or the battery module.
Unplug device from 'Surge Only' outlet and move to a 'Battery Backup outlet.
Contact Technical Support (see Service and Support below).
* B5: 3beeps / 30seconds :ON 0.25 seconds / OFF 0.25 seconds 3 times, 28.5seconds OFF |
Recycling Information:
Your UPS contains
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete warranty information and future support for your product.
Technical Support : techsupport@rosewill.com
Call Center : ( 800 )