Power LED

RDV-1060DVD Audio/Video Player

Selection Indicators	Front Panel

Status/Disc Type displays the current status of the unit (Open, Close, No Disc, etc.).

When using specific features during playback (such as Language selection, Time Display, Repeat Mode, etc.), indicators appear in the On-Screen Display showing the current status of that feature as you make changes.

NOTE: A hand icon is displayed when a but- ton press is not a valid operation accepted by the unit for the disc you are playing.

Menu Screens

A number of menu screens can appear dur- ing configuration of the RDV-1060 such as the sample below:

SETUP MENU -- MAIN PAGE

GENERAL SETUP

SPEAKER SETUP

AUDIO SETUP

PREFERENCES

EXIT SETUP

GO TO GENERAL SETUP PAGE

The menu screens provide access to various settings and features described in the Configu- ration section of this manual. The menu sys- tem appears when the OSD button is pressed, typically whether the disc or stopped or play- ing. The OSD menu does not appear when a DVD-A disc is playing. The Preferences menu screens are only available when disc playback is stopped.

The following is a brief overview of the con- trols and features on the front panel of the RDV-1060. Details concerning the use of these controls are provided in subsequent sections of this manual describing various tasks.

POWER Button

The POWER button serves as a master on/ off switch. In the out position, the unit is com- pletely powered down and cannot be activated by the remote. Press the button in to activate the unit, indicated by the front panel display being illuminated. With the front panel POWER button in the on position, the remote control ON/OFF buttons are used to activate the unit or put it in standby mode. In standby mode, the POWER LED remains lit, but the front panel display is turned off.

NOTE: Pressing the OPN/CLOSE or the PLAY/ ENTER buttons also activate the unit from standby mode.

LED Indicators

Two front-panel LEDs provide additional infor- mation during operation of the RDV-1060.

DVD-Audio lights when the disc contains DVD-Audio programming.

P-SCAN lights when the Progressive Scan feature has been activated for use with HDTV monitors.

When a disc is playing, this section of the display shows the sampling rate and format of the disc (DVD-V 48kHz, DVD-A 96kHz, etc.)

Audio Format displays the audio for- mat of the inserted disc (Dolby Digital, DTS, PCM, etc.)

Remain shows the letter R when the re- maining time of disc or selection is being dis- played.

Time displays the elapsed time when a disc is playing

Function indicates which special features are activated, A in the first segment for angle, Z in the second segment for zoom, an indi- cator for the type of repeat in the fourth seg- ment, and an L in the fifth segment when the OSD is being shown during setup or when playback is stopped with the resume feature storing the current position on the disc.

Audio Channel shows which of the six possible audio channels are in use. 2/0 indi- cates a stereo signal, 3/2 indicates a five channels with three front and two surround, 1CH to 6CH for DVD-A discs, etc.

Disc Drawer

A motor-driven disc drawer, located in the center of the RDV-1060, slides out to accept a disc and retracts for playback.

OPN/CLOSE Button

Press to open or close the Disc Drawer.

Screen Saver

To prevent damage to a TV monitor during prolonged display of a static image, the unit automatically activates a moving DVD logo screen saver display after several minutes.

The screen saver display is turned off, return- ing to the previous display, when any front- panel or remote button is pressed.

Front-Panel Display

Alighted display on the front-panel of the RDV-1060 provides information about the status of the unit, activation of special features, and track/time information. See the illustration at the front of this manual for the location of each section of the display:

Title/Group displays the number of the current Title or Group.