Rotel RSP-976 Configuration, On-ScreenDisplay, SYSTEM STATUS Menu, MAIN Menu, Navigation Buttons

RSP-976Surround Sound Processor 18

On-Screen Display /

Configuration

The RSP-976 features two on-screen systems to help operate the system. The first consists of simple status displays that appear on the TV screen whenever primary settings (Volume, Input, etc.) are changed. These status displays are self-explanatory.

A more comprehensive ON-SCREEN DISPLAY menu system is available at any time by press- ing the MENU button on the remote control. These menus guide you through the setup and operation of the RSP-976.

Figure 6 at the front of this manual shows all of the menus in the ON-SCREEN DISPLAY sys- tem and how to reach them. Most menus are used only to configure the system and not typi- cally during normal operation.

SYSTEM STATUS Menu

SYSTEM STATUS

LISTEN: Tuner

RECORD: CD

MODE: Dolby Digital

INPUT: Coaxial 1

VOLUME: 65

ENT KEY=MAIN MENU

OSD KEY=EXIT

MAIN Menu

MAIN MENU

INPUT: Setup

SPEAKER: Setup

DELAY: Setup

TEST TONE: Setup

SUB LEVEL: Setup

OTHER: Setup

ENT KEY=ENTER

UP KEY=up DWN KEY=down

The MAIN menu provides access to all other screens and menus and is reached by press- ing the ENTER button from the SYSTEM STA- TUS menu described above or from most other menus. To go to another menu, move the high-

Navigation Buttons

The following remote control buttons are used to navigate the ON-SCREEN DISPLAY menu system:

C

GUIDE MENU

	C	UP	M	K
L			OSD
M	-	ENT +		M
		DWN	PREV CH
	S		R
	SEARCH –		SEARCH +

C

MENU Button : To display the MAIN screen. All other menus are reached from this menu. If a menu is already visible, push this button to cancel the display.

DOWN/UP Buttons : To move up and

down in the lists that appear on the ON- SCREEN DISPLAY menu system.

+/– Buttons : To change the current set- tings for a selected menu choice on some menus in the ON-SCREEN DISPLAY menu system.

ENTER Button : To confirm a setting and return to the MAIN menu.

NOTE: A help system at the bottom of each ON-SCREEN DISPLAY menu reminds you which buttons to press.

The SYSTEM STATUS menu provides a snap- shot of the current system settings and a start- ing point for reaching all other screens and menus. This screen is appears when you press the MENU button on the remote control and displays the following information:

LISTEN: the source selected for listening.

RECORD: the source selected for the VIDEO outputs.

MODE: the current surround sound mode.

INPUT: the input selected for the current source: Optical, Coaxial, Analog, etc.

VOLUME: the current volume setting.

No changes can be made using this screen; it only provides information. To go to the rest of the menus, press the ENTER button to go to the MAIN menu. Press the MENU key on the remote to cancel the display and return to normal operation.

light to the desired line using the UP/DOWN buttons on the remote and press the ENTER button. Press the MENU key on the remote to cancel the display and return to normal op- eration.

INPUT Menu

INPUT SETUP

LISTEN: Video 2

INPUT LABEL: _ _ _ _ _

INPUT: Coaxial 1

INPUT MODE: Dolby 3 Stereo

DIGITAL OUT: Coaxial 1

ENT	KEY=MAIN MENU	UP KEY=up
+/–	KEY=change	DWN KEY=down

The INPUT menu configures the source inputs and is reached from the MAIN menu. The screen provides the following options, selected by placing the highlight on the desired line using the UP/DOWN buttons:

LISTEN: changes the current listening input source

INPUT LABEL: The labels for the five VIDEO inputs can customized. This is not available for the TUNER, CD, and TAPE inputs. Place the highlight on this line to call up a sub-menu that allows you to change the five-character label for the current VIDEO source. To change the label: