a home theater, you only use two speakers located to the side of your head. The Timbre Matching filters the information going to the surround speakers so that they more closely match the tonal characteristics of the sound coming from the front speakers. This ensures seamless panning between the front and surround speakers.
•Adaptive Decorrelation™: In a movie theater, a large number of surround speakers help create an enveloping surround sound experience. In a home theater, there are only two sur- round speakers which can reduce spatiousness and envelop- ment. Surround sound can also collapse into the closest speaker as you move away from the middle seating position. Adaptive Decorrelation slightly changes one surround channel’s time and phase relationship with respect to the other surround channel. This expands the listening position and cre- ates the same spacious surround experience as in a movie theater.
By pressing the MOVIE FILTER button on the remote control, you activate the THX technologies described above. Movies that have been encoded in Dolby Digital, DTS, Dolby Pro Logic, Stereo, and Mono can all benefit from activating these THX features. THX should only be activated for movies that were mixed for playback in large movie theaters. It need not be activated for music, made for TV movies, sports, talk shows or other programs mixed for small rooms.
Note: All of the surround modes described above are selected with the MODE button (described below) except Dolby Digital , DTS, and THX. Dolby Digital and DTS are automatically activated when special digital codes in the source material are detected. THX is added to any of the other cinema surround modes using the MOVIE FILTER button on the remote control or during initial system setup from the ON-SCREEN MENUS.
Mode Button 7
The MODE button selects one of the surround modes described above. To make a selection, press the MODE button (or the SUR- ROUND + button on the remote). The LED above the button will light. Each time you press the button while the LED is lit, the sur- round mode will cycle to the next available setting as indicated by the SURROUND MODE LEDs. In addition, the surround mode set- ting may be changed using the ON-SCREEN MENU system.
No selection is required when playing Dolby Digital or DTS source material. These settings are automatically engaged. THX can be added to any of the cinema surround modes by pressing the MOVIE FILTER button on the remote control.
Note: A default MODE selection can be memorized for each input so that whenever you select that input source, the desired mode is automatically engaged. The default setting is made from the ON-SCREEN MENU system during setup of the system described at the end of this manual.
RSP-985
RR-939 Remote Control
The RSP-985 includes a handheld remote control that does far more than operate the RSP-985. The RR-939 is a full-function uni- versal remote control that can operate up to 8 additional audio/ video components.
A separate manual, included with the remote, gives detailed infor- mation on programming and using the RR-939 to replace all of the remote controls in your system. This section is intended to provide only that information which pertains to the use of the RR-939 to operate the RSP-985.
Note: Many functions duplicate the RSP-985 front panel controls and are listed here only for your reference. Please refer to the previous Front Panel Controls section of this manual if you need additional information.
Programming the RR-939
The RR-939 is preprogrammed from the factory to operate the RSP-985. Should the AUDIO command set on your RR-939 not op- erate the RSP-985, it’s possible that the programming has been in- advertently changed. To program the remote to operate the
RSP-985 (AUDIO Button / 3-digit code 002):
Step One: Press the AUDIO button at the top of the remote while simultaneously pressing the MUTE button and hold both for at least one second. The AUDIO button will light in red for 20 sec- onds, indicating that you have entered the program mode. The next step must be done within this 20 second period, or the RR-939 will revert to its standard operating mode.
Step Two: Use the NUMERIC buttons to enter the 3-digit code
(002)for the RSP-985 – press 0, then 0, then 2. The AUDIO button will flash each time you enter a digit.
Step Three: Store the code number by pressing the corresponding AUDIO button again. The button will blink twice to confirm the storage of the code in memory.
To operate the RSP-985, make sure that the AUDIO mode is active by pressing it before you start. If it is active, pressing command keys on the RR-939 will cause the AUDIO button to flash red. Once the AUDIO mode is active, it will stay active unless you press one of the other DEVICE buttons to control a different component.
Power Button 28
Duplicates the function of the STANDBY switch on the front panel. Press to activate the RSP-985. Press again to deactivate.
Volume Buttons 27
A pair of buttons which duplicate the function of the front panel volume control. Press VOLUME UP to increase the volume and press VOLUME DOWN to decrease the volume. These buttons are also used to change the current settings for a menu choice in the ON-SCREEN MENU system.
