10
Specifications

FM Tuner

Usable Sensitivity: 14.2 dBf
50dB Quieting Sensitivity: 20.2 dBf (mono)
45.3 dBf (stereo)
Signal to Noise Ratio (at 65 dBf): 73 dBf (mono)
70 dBf (stereo)
Harmonic Distortion (at 65 dBf): 0.2% (mono)
0.3% (stereo)
Frequency Response: 10 Hz-15 kHz, ±3 dB
Capture Ratio: 2.0 dB
Alternate Channel Selectivity: 47 dB (±400 kHz)
Spurious Response Ratio: 90 dB
Image Rejection Ratio: 80 dB
IF Rejection Ratio: 80 dB
AM Suppression Ratio: 55 dB
Stereo Separation (100Hz/1 kHz/10 kHz): 40 dB/45 dB/35 dB
Output level: 1V
Antenna Input: 75 ohms unbalanced

AM Tuner

Usable Sensitivity: 500 µV/m
Selectivity: 25 dB
Harmonic Distortion: 0.5%
Image Rejection Ratio: 45 dB
Signal to Noise Ratio: 40 dB
Output level: 500 mV
Antenna Input: Loop Antenna

General

Power Consumption: 10 watts
Power Requirements (AC): 115 volts, 60 Hz (USA version)
230 volts, 50 Hz (European version)
Weight: 3.9 Kg/8.6 lb.
Dimensions (W x H x D): 435 x 72 x 319 mm
171/8" x 27/8" x 109/16"
Panel Height 60 mm / 23/8"
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.
RT-02 AM/FM Stereo Tuner

AF Button

Remote Only
In some cases, an RDS station is part of a
network of stations broadcasting the same
programming (for example, BBC1 program-
ming in the UK may be available at several
different frequencies). Stations broadcasting
this programming may transmit an RDS data
signal providing the tuner with a list of alter-
nate frequencies where this programming is
available. If this data list is transmitted, an AF
indicator will appear in the DISPLAY.
The AF button is used to scan the alternate
frequencies to find a stronger signal. The button
is only functional when the AF indicator is lit.
1. Press the AF button. The tuner will scan each
of the alternate frequencies for the same
programming in the stored list and tune
to the strongest signal.
2. If no station is located, the tuner will re-
turn to the last previously tuned station.
3. If the signal strength of the new station is
weaker, the tuner will revert to the previ-
ously tuned station.
4. Cancel the AF function by pressing any
button (except DIMMER or FM MONO).