Rotel RT-1082 owner manual Setup Operation

AF Button 5G

1.Press the AF button. The tuner will scan each of the alternate frequencies for the same programming in the stored list and tune to the strongest signal.

2.If no station is located, the tuner will return to the last previously tuned station.

3.If the signal strength of the new station is weaker, the tuner will revert to the previ- ously tuned station.

Cancel the AF function by pressing any button (except DIMMER or FM MONO).

Digital Audio Broadcast (DAB)

DAB Basic Information

DAB is short for ‘Digital Audio Broadcast’ and is a new form of radio broadcasting which utilizes digital technology. DAB is capable of providing near CD quality audio with virtually interference free reception.

DAB operates in frequency band III (174

–240MHz). Band III is divided into 41 chan- nels labeled 5A to 13F.

DAB channels are categorized into ensembles, which are also known as multiplexes. Each multiplex provides a number of stations and each service contains a primary service that can contain secondary services. DAB technol- ogy allows broadcasters to transmit additional data along with the audio, which can include other audio channels, text and in the future, even images and computer data.

NOTE: When the DAB tuner is used for the first time the FL display will ask whether you want to auto-tune to find the available ser- vice in your area. For most applications auto-tune should only need to be carried out once. Select <YES> to confirm the selection. The tuner will then search automatically for available stations on the DAB network. The number of stations received will depend on the location of your aerial and the available multiplexes in your area. For optimal recep- tion we recommend using a dedicated out- door aerial.

11

BAND, DAB Buttons tB

The RT-1082 receives AM, FM and DAB signals. DAB mode is selected by pressing the BAND key on the front panel. Direct access to DAB mode can be selected using the DAB button on the remote control

UP / DOWN Buttons =C

The UP and DOWN keys available on the front panel and remote control can be used to change between stations and also for selecting options in the set-up menu (see SETUP MENU).

ENTER Button -

Press the ENTER button on the front panel to confirm a selected parameter.

DISPLAY Button 9M

The RT-1082 displays service identification in the upper portion. This is information re- ceived from the network. The RT-1082 allows for several display modes which are shown in the lower portion of the FL display. Press <DISPLAY> button to toggle through the dif- ferent modes:

•Program type: Displays genre or other program information.

•Ensemble name: Multiplex identification is displayed.

•Frequency: Indicates the frequency that the selected multiplex is transmitted on.

•Bit rate: The rate at which bits (informa- tion) are transmitted. This is expressed in thousands of bits per second (Kbps), which effectively shows the quality of the broadcast. The higher the bit rate is the better the sound quality is.

•Dynamic label segment: This is the text that scrolls across the FL display giving gives information on the play list and current program content. This feature is subject to the service provider and station.

•Signal strength: Indicates the input signal level to the DAB module in block format.

English

MEMORY Button qK

The RT-1082 can store up to 99 DAB preset stations. When you want to save a selected station, press the memory button on the front panel, then one of the numerical buttons on the front panel that you wish to save the sta- tion to. FM and DAB memorized stations are separate meaning that a station can be saved to ‘1’ on DAB and another station with the same number for DAB.

NUMERIC Buttons 7E

The numerical buttons can be used to store to a PRESET station or recall a PRESET.

TUNE/PRESET Button e

The RT-1082 has two operating modes:

•DAB Manual Mode: When the tuner is selected to this mode you can scroll through all the available stations using the up and down keys.

•DAB Preset Mode: Use the preset but- ton to enable you to use the up and down keys to scroll through your saved stations. Preset is displayed in the FL display when you have selected this operating mode.

Setup Operation

NOTE: The set-up menu features advanced settings. In most installations the factory de- fault will be the optimal required setting for the RT-1082.

SETUP Button 0

The SETUP button on the front panel accesses the Setup menu used for the advanced settings of the RT-1082.

SETUP Menu

Press the SETUP button on the front panel to view the menu settings in the FL display. The operation can be cancelled by pressing SETUP again. The menu will also automatically be exited after a short period of when there is no key press.

Use the UP and DOWN keys on the front panel to scroll through the different menu settings. Press the enter button to confirm a selection.