Rotel RT-955 AUTO TUNING Button, TUNE/PRESET Button, PRESET SCAN Button, DISPLAY Button, English

EXAMPLES:
(USA FM) 87.50MHz	Press 8>7>5
(Europe FM) 87.50MHz	Press 8>7>5>0
(all AM) 1610kHz	Press 1>6>1>0

If no frequency is entered within 5 sec- onds, the tuner will cancel FREQUENCY DIRECT tuning mode and revert to the last previously tuned station.

AUTO TUNING Button

The AUTO TUNING button toggles between the frequency search tuning feature and manual frequency tuning. When using the TUNING controls on the front panel or re- mote in AUTO TUNING mode, the tuner will begin automatically scanning up or down through the frequencies until the next receiv- able broadcast signal is detected. If this is not the desired station, use the TUNING controls again to find the next station. Weak stations will be skipped during auto tuning. If no receivable signal is detected, the tuner will revert to the previously tuned station.

To toggle between FREQUENCY TUNING mode and AUTO TUNING mode, press the AUTO TUNING button. An AUTO indica- tor will appear in the display.

NOTE: AUTO TUNING mode is disengaged when the TUNE/PRESET button is set to PRESET tuning mode. See the following sec- tion.

TUNE/PRESET Button

The TUNE/PRESET button toggles between FREQUENCY TUNING mode (the TUNING controls advance to the next station fre- quency) and PRESET TUNING mode (the TUNING controls advance to the next memo- rized station preset). To toggle between the two modes, press the TUNE/PRESET button. A PRESET indicator in the front panel DIS- PLAY will light when the PRESET mode is ac- tive.

NOTE: AUTO TUNING mode is disengaged when the TUNE/PRESET button is set to PRESET tuning mode.

9

PRESET SCAN Button

This button activates a preset scanning fea- ture. When you press the button, the tuner will automatically scan through all memo- rized station presets, playing each for five seconds before moving to the next. To stop the station scanning on the desired station preset, press the button again.

NOTE: If a PRESET station is currently tuned when the PRESET SCAN button is pressed, scanning will start with the next higher pre- set number and continue through all preset stations, stopping on the initial preset. If a PRESET station is not currently tuned when the button is pressed, scanning will start from PRESET 1 and continue to PRESET 30.

RDS and RBDS Broadcast Reception

The Rotel RT-955 is equipped with RDS (Ra- dio Data Systems) reception capabilities for Europe and RBDS (Radio Broadcast Data Service) capabilities for the United States. These broadcast systems provide additional functionality to FM radio reception by trans- mitting encoded information along with the radio signal. This signal is decoded by an RDS or RBDS receiver and can provide a range of informational features including:

1.a display of the station’s identifying name (e.g. BBC1)

2.a display of the station’s program con- tent (e.g. ROCK or NEWS)

3.traffic information broadcasts

4.a scrolling text display for announcements or information

In addition, RDS provides several advanced search features including:

1.the ability to search for a station with the desired program content (PTY)

2.the ability to search for traffic informa- tion (TP)

3.the ability to automatically search stations broadcasting special traffic announce- ments (TA).

English

RDS broadcasting has been widely available in many European markets for years. There are a large number of RDS stations and most users will be familiar with the features and operation. In the USA, implementation of the RBDS system is more recent. Fewer stations are currently broadcasting RBDS signals and the features may be less familiar to many users. Consult your authorized Rotel dealer for more information on RDS or RBDS broad- casting in your market.

NOTE: The RDS and RBDS features are en- tirely dependent on the broadcaster send- ing properly encoded signals. Thus, they will only be available in markets where RDS or RBDS is currently implemented and where stations are broadcasting these data sig- nals. If there are no RDS or RBDS stations, the RT-955 will function as a standard ra- dio receiver.

NOTE: RDS and RBDS services are only avail- able on FM broadcasts. The features and buttons described below are only opera- tional in FM mode.

DISPLAY Button

There are five display options when the currently tuned station is broadcasting RDS information and the RDS indicator in the front panel display is lit. Press the DISPLAY but- ton to step sequentially through the five avail- able display options:

1.Standard FREQUENCY display.

2.PROGRAM SERVICE name. This is typi- cally the station’s call letters, such as BBC1). If the current station is not broad- casting an RDS signal, the display will show a blinking PS indication.

3.PROGRAM TYPE. This is a description of the station’s content from a standardized list of program types in each market (for example: NEWS, CURRENT AFFAIRS, INFO, SPORT, EDUCATION, DRAMA, CULTURE, SCIENCE, VARIED, POP, ROCK, EASY LISTENING, LIGHT CLAS- SICAL, SERIOUS CLASSICAL, OTHER MUSIC, WEATHER, FINANCE, CHIL- DREN, SOCIAL AFFAIRS, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATIONAL MUSIC, OLDIES, FOLK, and DOCUMENTARY). If the cur-