Rover 24755x50A, 24750x50A manual Replacement Part Numbers for Mulcher KIT, Mulching Tips

38” MODEL 24750x50A & 40” MODEL 24755x50A MULCHER KITS

MULCHING TIPS

When you use a mulcher attachment, the grass is cut into very small pieces. These small pieces will quickly break down. Because the nutrients are returned to the soil, the lawn will need less fertilizer. Too correctly mulch the grass, follow the steps below.

1.Set the throttle in the FAST position. Operate the mower at a slower ground speed. If ground speed is too fast, the grass will not have an even cut.

2.Keep a sharp edge on the blade. A blade that is not sharp will cause the ends of the grass to become brown.

3.Make sure the grass is dry. Wet grass is difficult to cut.

4.Set the height of the mower housing so that only the top third of the grass is cut. If the grass is too high, set the height of the mower housing to the maximum height. Then, lower the mower housing for the second cut. Also, instead of using the full width of the mower housing, mulch at half the width.

5.Clean the bottom of the mower housing. Grass and other debris can keep the mower from working correctly.

6.If the grass grows fast, mulch more often.

7.If an area needs improvement, mulch a second time.

REPLACEMENT PART NUMBERS FOR MULCHER KIT

		38 Inch	40 Inch
Key No.	Description	Model 24750x50A	Model 24755x50A
		Part Number	Part Number
1	Mulcher Plate	095080E700	095080E700
2	Wingnut	014x86	014x86
3	Carriage Bolt	002x64	002x64
4	Blade, 3n1	1001427E701	1001428E701
––	Instruction Sheet, Mulcher	F–020904L	F–020904L

1

4

2

4 3

1

2

F–020904L 2