Removing the soleplate cover
The steambrush should be unplugged and completely cool when removing or attaching the soleplate cover.
To remove the soleplate cover (K) turn the soleplate cover lock (G) a half turn
(180° ) to the right.
Grip the soleplate cover by the ribbed finger grips (J) on both sides as shown and
pull towards the tip of unit to remove.
Reference “Ironing Function“ section of instructions for further use information.
IRONING FUNCTION
The soleplate of the Steam 'n Press will smooth out tough wrinkles from clothes and press in sharp creases and pleats.
Starting up
!Before plugging in please remove cover.
When the Steam 'n Press is plugged in the soleplate heats. Do not touch or remove the soleplate cover without letting the soleplate cool down.
Remove the soleplate cover as indicated in instructions called “Removing the Soleplate Cover“.
Plug in the appliance, place it on its side and wait approximately one minute for it
to reach full temperature before using. During use or while unit is heating or
cooling, do not rest it on its soleplate. Place product on its side on a firm flat surface, as it will be hot.
Never iron clothes while they are ! being worn.
7
