DESCRIPTION
This Royal Cozy Fires Decorative Fuel Effect gas fire has been developed to give a realistic coal burning appearance with the instant control and convenience of gas. The fire has been constructed to enable it to be installed into applications where the warmth and comfort of an open fire and high radiant heat is required. This appliance is intended for decorative purposes, the coal bed uses ceramic simulated coals to give a realistic appearance and to allow secondary air to be entrained into the bed to ensure clean combustion. An aerated single port steel burner is used running parallel across the front of the fire. A single gas control with a variable high to low setting is used with a Flame Supervision Device (FSD). This is fitted to ensure that should the pilot flame be extinguished for any reason, (including turning off the appliance), the gas supply to the burner is cut off until a full lighting sequence is repeated. A separate Piezo igniter is used to ignite an Oxy/pilot sensor (O.D.S) that will cause the appliance to ‘shut off’ in the event of continued spillage occurring under hazardous or blocked flue conditions. The fire bed consists of ceramic fibre components and coals all of that are removable for cleaning purposes when required. It is important when relaying the coal bed and coals to follow the instructions correctly.
This appliance is suitable for installations into the following flues: 7" minimum diameter flues (CLASS 1),
5" minimum diameter flues (CLASS 2),
The installations must always be used in conjunction with a suitable hearth and surround. .
TECHNICAL DATA |
|
|
|
Overall height of fire |
| = | 602 mm |
Overall width of fire |
| = | 505 mm |
Minimum height of opening required | = | 550 mm | |
Minimum width of opening required | = | 396 mm | |
Forward projection from opening | = | 50 mm | |
(without front & fret) |
|
|
|
Depth behind opening |
| = | 122 mm |
TYPE OF GAS G31 Only |
|
|
|
Supply Pressure 37 mbar +/- 1mbar (Cold) |
| ||
GAS INPUTS (Gross) |
|
|
|
Max 6 kW (20470 | Btu/h) |
|
|
Min 3.5kW (11940 | Btu/h) |
|
|
Pilot 0.26 kW ( 890 | Btu/h) |
|
|
Main Injector Type |
|
|
|
Stereomatic |
|
| |
Pilot |
|
|
|
OP. Oxy/Pilot 1PG 9214 |
|
| |
GAS CONNECTION |
|
|
|
8mm O/D Tube |
|
|
|
WEIGHT 11.5 kg without front & fret | 14.5 kg with front & fret. |
Page 2