ARP-1008 / ARP-1010

Troubleshooting

Problem

Possible Reasons

 

- Check and reset the power plug. Wait 3 minutes and try to run the unit again.

 

- The batteries in the remote may need to be replaced. Replace the batteries and try to run the unit again.

Air Conditioner does not operate

- Make sure the plug is properly inserted into the outlet.

 

- The set temperature may be too close to room temperature. Lower the set temperature.

 

- The air outlet may be blocked. Check the air outlet and remove any items that may be found.

 

 

 

- Check the room for open doors or windows and close them.

 

- There may be another appliance in the room giving off heat. Check the room and turn off the appliance.

Air Conditioner runs but does not cool

- The air filter may be dirty. Check the filter and clean if necessary.

 

- The air exhaust or intake may be blocked.

 

- The set temperature may be too high. Check the set temperature and reduce it if necessary.

 

 

Air Conditioner does not run

- There may be excess water in the unit. Drain the unit.

and water full indicator is lit

 

 

 

13

Page 13
Image 13
Royal Sovereign ARP-1008, ARP-1010 owner manual Troubleshooting, Make sure the plug is properly inserted into the outlet