Royal Sovereign ARP-9009TL, ARP-9011TL owner manual Timer, Sleep, Tank Full, Automatic Restart

TIMER

There are 2 different timer programs. You can set the number of hours before the air conditioner automatically turns OFF so that you can set the number of hours that will elapse before the unit turns ON.

When the air conditioner is turned off, you can choose to turn it on in one hour intervals.

1.Press the Timer button on the Control Panel (the timer indicator light will be lit).

2.Continue to press the Timer button until you reach the number of hours you want to elapse before the unit turns on. Example: lf you want the air conditioner to turn on in eight hours, press the button until you see 8 on the display.

3.The unit will turn on when the set time elapses.

When the air conditioner is turned on, you can choose to turn it off in one hour intervals.

1.Press the Timer button on the Control Panel (the timer indicator light will be lit).

2.Continue to press the Timer button until you reach the number of hours you want to elapse before the unit turns off. Example: lf you want the air conditioner to turn off in eight hours, press the button until you see 8 on the display.

3.The unit will turn off when the set time elapses.

SLEEP

Sleep Mode is used to keep the room comfortable while saving energy. When the Sleep Mode button is pressed, the set temperature will increase by 2 °F in the first hour and increase another 2° the second hour. It will then remain at that temperature for the remainder of the night.

TANK FULL

The appliance has built-in evaporating system. The water is turned into humid air and evaporated through the exhaust hose. If the humidity level is high, it is possible to have to empty the internal water tank manually. If this happens, an alarm will beep for 15 times and the unit will stop running. The appliance can be restarted after draining the condensate water through drain port located at the bottom of the back of the PAC.

AUTOMATIC RESTART

In the event of a power failure: The settings will return to the previously set operating modes once the power is restored.

10