Royal Sovereign Operation, BDH-450 / BDH-550, Control Panel, Power Button, Humidity, Fan Speed

BDH-450 / BDH-550

OPERATION

BDH-450 BDH-550

Control Panel

HIGH

FAN SPEED

LOW

DEFROST

WATER

HIGH

MEDIUM

FAN SPEED

LOW

DEFROST

WATER

POWER	POWER
HUMIDITY LEVEL	HUMIDITY LEVEL

Power Button

The power button turns on and off. When you press the button, the unit begins to operate and the light will illuminate.

Humidity

The humidity function will allow you to set the desired level of humidity you would like for the room. To set it, use the “-” or “+” button to set your desired level. The unit will turn on automatically when the room humidity is higher than the selected level.

The humidity level may be set between level 30-80. The operational temperature for this unit is between 40 °F and 95 °F. If the temperature of the room falls below 40 °F, the unit will stop. This helps to protect the compressor inside the unit.

Note: The selected humidity may vary +,- 5%

Fan Speed

Press the fan button to change the fan speed.

Defrost Light

If ice forms on the internal coils, the defrost light will light up. The dehumidifier will automatically go into auto defrost mode. The defrosting light will remain on until defrosting is complete. Once the defrosting is complete, the unit will operate again.

Water Light

If for any reason the water is restricted from exiting the unit, the water light will be lit. Review the troubleshooting section of this manual for possible solutions.

7