3. SAFETY PRECAUTIONS
Failure to comply with any of the following safety procedures could result in serious injury. Please read the instructions carefully and keep for future reference.
1.Only a licensed electrician should install wiring and outlet for the laminator.
2.Ensure the unit is plugged into a properly grounded outlet with the correct voltage.
3.Keep hands and clothing (i.e. Neckties) away from rollers.The rollers are pinch points that can trap body parts or clothing and cause serious injury.
4.Keep flammable and wet objects away from the machine.
5.Place machine on a level surface.
6.Avoid excessive sunlight, humidity and extreme temperatures.
7.Ensure the unit is turned off, cooled, and unplugged from the outlet prior to moving and/or repairing.
8.Keep out of reach of children.
9.Only Royal Sovereign authorized maintenance and service technicians should make repairs.
10.Do not attempt to laminate items that exceed total recommended material thickness for the unit
11.When cleaning the machine, don't use flammable sprays or materials.
12.Do not touch the rollers when they are hot or place foreign objects inside the machine.
13.Do not cover the surface of the machine until the machine has completely cooled.
4. PARTS
1.Upper Film | 2.Lower Film | 3.Idle Bar |
4.Hot Rollers | 5.Feed Table | 6.Paper Guide |
7.Control Panel | 8.Tension Knob | 9.Power Switch |
4 | 5 |
