Royal Sovereign RSL-380 Features Guide, Operation Instructions, to the motor will turn off, 5mil

5. FEATURES GUIDE

Run and stop the machine

Reverse the rollers to undo jams and correct misfed documents

Reduce roller speed (1~10 speed settings)

Increase roller speed (1~10 speed settings)

25~38mic
	Laminate 25~38mic (1~1.5mil) film
(1~1.5mil)
50~100mic
	Laminate 50~100mic (2~4mil) film
(2~4mil)
125mic	Laminate 125mic (5mil) film
(5mil)

RSL-380

6. OPERATION INSTRUCTIONS

Power Switch (1) - Located on the rear of the machine. “I” (on) “0” (off). (Fig. 1)

Cross Cutter (2) - Used to cut off the laminated web. (Fig. 1)

Feed Guide (3) -The feed guide permits	Figure 1
alignment of the item(s) to be laminated. To
position the adjustable guide, loosen the knob,
slide it to the desired position and tighten the
knob to secure the feed guide in place. (Fig.2)
Safety Shield (4) - It prevents entanglement
NOTE: If the safety shield is opened, the power
to the motor will turn off.	Figure 2
Film Shaft and Locking
Core Adapter (5) -
The film shaft holds the film supply on the
machine. The locking core holds and locks the
film on the shaft to prevent shifting. (Fig.3)
	Figure 3
Film Tension Adjustment (6) - Allows the
operator to increase or decrease film web
tension. To increase the tension turn the knob
clockwise and to decrease tension turn the
knob counterclockwise. (Fig. 4)
	Figure 4

6 7