3. Safety Precautions

Failure to comply with any of the following safety procedures could result in serious injury. Please read the instructions carefully and keep for future reference.

1.Only a licensed electrician should install wiring and outlet for the laminator.

2.Ensure the unit is plugged into a properly grounded outlet with the correct voltage.

3.Keep hands and clothing (i.e. Neckties) away from rollers.The rollers have pinch points that can trap body parts or

clothing and cause serious injury.

4.Keep flammable and wet objects away from the machine.

5.Place machine on a level surface.

6.Avoid excessive sunlight, humidity and extreme temperatures.

7.Ensure the unit is turned off, cooled, and unplugged from the outlet prior to moving and/or repairing.

8.Keep out of reach of children.

9.Only authorized maintenance and service technicians should make repairs.

10.Do not attempt to laminate items that exceed total recommended material thickness for the unit

11.When cleaning the machine, don't use flammable sprays or materials.

12.Do not touch the rollers when hot.

Do not place any foreign obects inside the laminator.

13.Do not cover the surface of the machine until the machine has completely cooled.

14.You can laminate by single film when the switch in the left cover is “O”.

(Insure the machine drastically cold, press the button in the left cover be “ O ”, then you can laminate by single side. It is a damage for the paper to laminate by single side while the rollers up and low are heating all together.) - Model applies RSL-2701S only for USA.

4

Page 4
Image 4
Royal Sovereign RSL2701S, RSL2701U owner manual Safety Precautions