RSA Lighting 12V AR70 specifications Housing, System Protection, Junction Box, Electrical, Lamps

DESCRIPTION

An adjustable Single-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes ONE (1) 12V AR70 lamp.

For remodel applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

Type

Date

A.... Housing

Housing and junction box are aluminum, trimless meshplate is steel with powder coated finish. Perforated meshplate allows for trimless installation in drywall/ plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate various ceiling thickness.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.

D... Electrical

Integral electronic or magnetic low voltage transformers. Transformers and electrical are mounted in a separate metal enclosure box attached to the junction box with 18” of flexible conduit. Transformer enclosure includes a separated wiring compartment and two knockouts for conduit entry. Transformer enclosure features perforated metal door for easy maintenance access and cooler operation. Entire electrical assembly (jbox and transformer enclosure) is removable from the housing for easy maintenance.

E.... Lamps

One (1) 12V AR70 lamp mounted in adjustable double gimbal. Lamp holder is removable and may be regressed 1” for additional cut-off. Lamp can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º locking lamp adjustment. Beveled-edge lamp ring is

secured with threadless, bayonet action. Optional retractable arm is available for lamp pulldown and extreme aiming. Double contact bayonet base sockets included.

F.... Mounting

Mounting clips are provided which mount the housing edge flush with the finished ceiling line. Mounting clips are secured to the housing through the meshplate with screws.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 5.76” x 5.76”

COMBOLIGHT®

Next Generation

Recessed

Single-Lamp Fixture

One (1) Light 12V AR70

Remodel Housing Trimless

Double

Gimbal

45º x 45º Adjust

1.60”

NOTES:

De-Rated wattage labels are available. 12V Primary voltage is available.

9.27”		7.45”	5.47”
		Required
		above
		ceiling
	7.95”
10.96”			12.01”
			4.65”
4.10”
Integral
Low Voltage	9.25”	4.65”
Transformers
Separate Wiring
Compartment
			Thermal
	18” flexible conduit		Protector

ORDERING INFORMATION

C1

R

N

N

Configuration			Lamp Type / Wattage Label
C1 = COMBOLIGHT			050A70 = 50 Watt max. AR70 12V
Recessed One (1) Light
	Housing
	R =	Remodel

Power Supply

Voltage

1 = 120V

2 = 277V

Power Supply

E = Electronic Low Voltage

Transformer

M = Magnetic Low Voltage

Transformer

Lamp Mechanism

G = Double Gimbal

R = Retractable Double Gimbal

Trim Insert

N = Trimless

Trim Insert Finish

N = Trimless

Housing Interior/Electrical Door/Sleeve Finish

W = White

B = Black

S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 022408

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031