The length of the PIN is determined by the configuration settings on the RSA Authentication Manager. In the above screen, the user should make a selection by clicking on the desired button, enter a PIN if desired in the PIN and Confirm fields, and push the Ok button. If the PIN is valid, the following screen is displayed instructing the user to wait for the token code to change and then signing in with their new passcode (PIN + tokencode).
The screens for the other two New PIN options are shown below. The first is when the user is required to choose their PIN. The second is when the system generates the PIN for the user. Again, the New PIN Mode behavior is determined by the settings in the RSA Authentication Manager and can not be set in the TITAN application.
8
