RTS DKP 16 CLD, EKP 32 CLD, KP 32 CLD - page 125

119
12. Using the 3(↑) or 6(↓), select the group you want to assign the GPIO Input to.
A blue arrow appears next to the selected option.
To setup GPIO outputs talk key, do the following:
NOTE: There are no open collectors available on the DKP 16 CLD.
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3(↑) or 6(↓), select Service.
3. Press the SEL button.
The Service submenu appears in the display window.
4. Using the 3(↑) or 6(↓), select Local GPIO.
5. Press the SEL button.
GPIO Inputs and GPIO Outputs appear in the display window.
6. Using the 3(↑) or 6(↓), select GPIO Outputs.
7. Press the SEL button.
OC Out 1, OC Out 2, Relay 1, Relay 2, and Relay 3 appear in the display window.
8. Using the 3(↑) or 6(↓), select Relay 1, Relay 2, Relay 3, OC Out 1, and OC Out 2.
9. Press the SEL button.
Not Assigned, Talk Key, UPG 1 and UPG 2 appear in the display window.
10. Using the 3(↑) or 6(↓), select Talk Key.
11. Press SEL.
Tap Key appears in the display window.
12. Tap th e key you want to assign the GPIO Output assignment.
The selected keypanel key turns red.
FIGURE 121. Service - Key Group Options
FIGURE 122. Service Menu - GPIO Output Options