Controls and Connections - Top Panel
1. On/Off & Volume Control: Turns the beltpack power
on and controls headset volume.
2. Intercom Buttons: Assignable for several types of
operation, including talk only, listen only, talk with auto-
listen, and all-call (where activating the key also acti-
vates all keys to the left of that key). Keys feature
momentary or latching operation. For momentary oper-
ation, the operator presses and holds a key while com-
municating, then releases it when finished. For latching
operation, the operator taps a key to turn it on, then taps
it again to turn it off. Latching can be disabled via soft-
ware options in the base station or from AZedit. Two bi-
color (red and green) LED indicators for each key pro-
vide indications for talk on/off, listen on/off, incoming
call, busy (for keys assigned to talk to IFB’s), and in-use
(for keys assigned to talk to either IFB’s or ISO’s).
3. Copy and Scroll keys: Used for key and setup page
assignment. Can also be used to talk to any location in
the intercom system when no intercom key is assigned.
(Note: There are 4 setup pages. Each contains a com-
plete set of key assignments.)
4. Call Waiting Display: 4-character, alphanumeric dis-
play for incoming caller names.
5. Relay push button: A momentary or latching (set via
beltpack software) push button for activating the relay
contact closure on the rear of the base station.
6. Bat/O.M. Light
Section
3
3-1
RKP-4 Beltpack
Figure 3-1
RKP-4 Top Panel