GS-2124C User Manual
Publication date: June, 2005
Revision A1
119
Function name:
Events Configuration
Function description:
The Trap Events Configuration function is used to enable the switch to send
out the trap information while pre-defined trap events occurred. The switch
offers 24 different trap events to users for switch management. The trap
information can be sent out in thre e ways, including email, mobile phone SMS
(short message s ystem) and trap. The message will be sent while users tick
() the trap event individually on the web page shown as below.
Parameter description:
These trap functions are as they desc ribe. The special one is Module Swap. It
means that when the switch detects a module with the different module ID to
be inserted, the switch tre ats it as Module swapped. The traps that the switch
supports are listed below.
STP: STP Topology Changed, STP Disabled, STP Enabled
LACP: LACP Disabled, LACP Enabled, LACP Member Added,
LACP Port Failure
GVRP: GVRP Disabled, GVRP Enabled
VLAN: VLAN Disabled, Port-based VLAN Enabled, Tag-based VLAN
Enabled, Metro-mode Vlan Enabled, Double-tag Vlan Enabled
Module Swap: Module Inserted, Module Removed, Dual Media Swapped
Trap: Cold Start, Warm Start, Link Down, Link Up, Authentication
Failure, User login, User logout
Events Configur
ation
Email/SMS
Configuration
Alarm Configuration