RuggedCom RS900G manual Twisted Pair Data Port Specifications, Fiber Optical Port Specifications

3.4 Twisted Pair Data Port Specifications

Data Port	Media	Distance
10/100 Mbps	Cat 5 UTP or STP	100m

Connector Type

RJ45

3.5 Fiber Optical Port Specifications

For maximum flexibility RuggedCom Inc. offers a number of different transceiver choices for Gigabit fiber optical communications. The following table details fiber optic specifications based on the order code / transceiver selected at time of ordering.

Order	Mode /		Tx λ	Cable		Tx Pwr			Rx		Rx
						(dBm) 3			Sensitivity		Saturation
Code	Connector		(nm)	Type2
						(Min/Max)			(dBm) 3		(dBm) 3
2LCMM	MM / LC	850		50∝/125	-9.5 / -4			-20		0
2LC10	SM / LC	1310		9∝/125	-9.5 / -3			-22		-3
2LC25	SM / LC	1310		9∝/125	-5 / 0			-22		-3
2SC10	SM / SC	1310		9∝/125	-10 / -3			-22		-3
2SC25	SM / SC	1310		9∝/125	-7		/ -3	-24		-3
SFP	MM / LC	850		50∝/125	-8.5 / -4			-22		-3
SFP	SM / LC	1310		9∝/125	-9		/ -3	-24		0
SFP	SM / LC	1310		9∝/125	-7		/ -3	-26		-3
SFP4	SM / LC	1550		9∝/125	-5 / 0			-26		0
SFP4	SM / LC	1550		9∝/125	0		/ 5	-26		0
SFP	SM / SC	1310		9∝/125	-9		/ -3	-22		-3
	Simplex
SFP4	SM / SC	1490		9∝/125	-9		/ -3	-22		-3
	Simplex

Typical

Distance1

(km)

0.5

10

25

10

25

0.5

10

25

50

80

10

10

NOTES:

1.Maximum segment length is greatly dependent on factors such as fiber quality, and number of patches and splices. Please consult RuggedCom sales associates when determining maximum segment distances.

2.All cabling is duplex type unless otherwise specified.

3.All optical power numbers are listed as dBm averages.

4.These transceivers utilize a distributed feedback (DFB) type laser and are rated for -20°C to +85°C operation only.

15

 2008 RuggedCom Inc. All rights reserved Rev104