RuggedCom RS910W manual IEC 61850-3 Type Tests

6 Type Tests

6.1 IEC 61850-3 Type Tests

Test	Description			Test Levels		Severity
						Levels
IEC 61000-4-2	ESD	Enclosure Contact		+/- 8kV	4
		Enclosure Air		+/- 15kV	4
IEC 61000-4-3	Radiated RFI	Enclosure ports		20 V/m		x
		Signal ports		+/- 4kV @ 2.5kHz		x
IEC 61000-4-4	Burst (Fast	D.C. Power ports		+/- 4kV	4
	Transient)	A.C. Power ports		+/- 4kV	4
		Earth ground ports		+/- 4kV	4
		Signal ports	+/- 4kV line-to-earth, +/- 2kV line-to-		4
				line
IEC 61000-4-5	Surge	D.C. Power ports	+/- 2kV line-to-earth, +/- 1kV line-to-		3
				line
		A.C. Power ports	+/- 4kV line-to-earth, +/- 2kV line-to-		4
				line
		Signal ports		10V	3
IEC 61000-4-6	Induced	D.C Power ports		10V	3
	(Conducted) RFI	A.C. Power ports		10V	3
		Earth ground ports		10V	3
IEC 61000-4-8	Magnetic Field	Enclosure ports	40 A/m continuous, 1000 A/m for 1 s			N/A
		D.C. Power ports	30% for 0.1s, 60% for 0.1s, 100% for			N/A
IEC 61000-4-29				0.05s
	Voltage Dips &
			30% for 1 period, 60% for 50 periods			N/A
	Interrupts
IEC 61000-4-11		A.C. Power ports	100% for 5 periods, 100% for 50			N/A
				periods2
		Signal ports	2.5kV common, 1kV differential mode		3
				@ 1MHz
IEC 61000-4-12	Damped	D.C. Power ports	2.5kV common, 1kV differential mode		3
	Oscillatory			@ 1MHz
		A.C. Power ports	2.5kV common, 1kV differential mode		3
				@ 1MHz
IEC 61000-4-16	Mains Frequency	Signal ports	30V Continuous, 300V for 1s		4
	Voltage	D.C. Power ports	30V Continuous, 300V for 1s		4
IEC 61000-4-17	Ripple on D.C.	D.C. Power ports		10%	3
	Power Supply
	Dielectric	Signal ports	2kVac	(Fail-Safe Relay output)		N/A
IEC 60255-5		D.C. Power ports		2kVac		N/A
	Strength
		A.C. Power ports		2kVac		N/A
		Signal ports	5kV	(Fail-Safe Relay output)		N/A
IEC 60255-5	H.V. Impulse	D.C. Power ports		5kV		N/A
		A.C. Power ports		5kV		N/A

Table 15 - IEC 61850-3 Type Tests

	27
 2007 RuggedCom Inc. All rights reserved	Rev100