RuggedCom RS930L warranty EMI and Environmental Type Tests

RuggedVDSL™ RS930L

6-Port Managed Ethernet Switch with Dual Port Ethernet over VDSL Uplinks

EMI and Environmental Type Tests

IEC 61850-3 EMI TYPE TESTS

TEST	Description		Test Levels	Severity Levels
IEC 61000-4-2	ESD	Enclosure Contact	+/- 8kV	4
		Enclosure Air	+/- 15kV	4
IEC 61000-4-3	Radiated RFI	Enclosure ports	20 V/m	x
		Signal ports	+/- 4kV @ 2.5kHz	x
		D.C. Power ports	+/- 4kV	4
IEC 61000-4-4	Burst (Fast Transient)
		A.C. Power ports	+/- 4kV	4
		Earth ground ports 3	+/- 4kV	4
		Signal ports	+/- 4kV line-to-earth, +/- 2kV line-to-line	4
IEC 61000-4-5	Surge	D.C. Power ports	+/- 2kV line-to-earth, +/- 1kV line-to-line	3
		A.C. Power ports	+/- 4kV line-to-earth, +/- 2kV line-to-line	4
		Signal ports	10V	3
		D.C Power ports	10V	3
IEC 61000-4-6	Induced (Conducted) RFI
		A.C. Power ports	10V	3
		Earth ground ports 3	10V	3
IEC 61000-4-8	Magnetic Field	Enclosure ports	40 A/m continuous, 1000 A/m for 1 s	N/A
		D.C. Power ports	30% for 0.1s, 60% for 0.1s, 100% for 0.05s	N/A
IEC 61000-4-29
	Voltage Dips & Interrupts		30% for 1 period, 60% for 50 periods	N/A
		A.C. Power ports
IEC 61000-4-11			100% for 5 periods, 100% for 50 periods 2	N/A
		Signal ports	2.5kV common, 1kV diff. mode@1MHz	3
IEC 61000-4-12	Damped Oscillatory	D.C. Power ports	2.5kV common, 1kV diff. mode@1MHz	3
		A.C. Power ports	2.5kV common, 1kV diff. mode@1MHz	3
IEC 61000-4-16	Mains Frequency Voltage	Signal ports	30V Continuous, 300V for 1s	4
		D.C. Power ports	30V Continuous, 300V for 1s	4
IEC 61000-4-17	Ripple on D.C. Power Supply	D.C. Power ports	10%	3
		Signal ports	2kVac (Fail-Safe Relay output)	N/A
IEC 60255-5	Dielectric Strength	D.C. Power ports	2kVac	N/A
		A.C. Power ports	2kVac	N/A
		Signal ports	5kV (Fail-Safe Relay output)	N/A
IEC 60255-5	H.V. Impulse	D.C. Power ports	5kV	N/A
		A.C. Power ports	5kV	N/A

IEEE 1613 (C37.90.x) EMI IMMUNITY TYPE TESTS

Test	Description		Test Levels	Severity Levels
IEEE C37.90.3	ESD	Enclosure Contact	+/- 8kV	N/A
		Enclosure Air	+/- 15kV	N/A
IEEE C37.90.2	Radiated RFI	Enclosure ports	35 V/m	N/A
		Signal ports	+/- 4kV @ 2.5kHz	N/A
IEEE C37.90.1	Fast Transient	D.C. Power ports	+/- 4kV	N/A
		A.C. Power ports	+/- 4kV	N/A
		Earth ground ports3	+/- 4kV	N/A
		Signal ports	2.5kV common mode @1MHz	N/A
IEEE C37.90.1	Oscillatory	D.C. Power ports	2.5kV common, 1kV diff. mode@1MHz	N/A
		A.C. Power ports	2.5kV common, 1kV diff. mode@1MHz	N/A
		Signal ports	5kV (Fail-Safe Relay output)	N/A
IEEE C37.90	H.V. Impulse	D.C. Power ports	5kV	N/A
		A.C. Power ports	5kV	N/A
		Signal ports	2kVac	N/A
IEEE C37.90	Dielectric Strength
		D.C. Power ports	2kVac	N/A
		A.C. Power ports	2kVac	N/A

Environmental Type Tests

Test	Description		Test Levels	Severity Levels
IEC 60068-2-1	Cold Temperature	Test Ad	-40°C, 16 Hours	N/A
IEC 60068-2-2	Dry Heat	Test Bd	+85°C, 16 Hours	N/A
IEC 60068-2-30	Humidity (Damp Heat, Cyclic)	Test Db	95% (non-condensing), 55°C , 6	N/A
			cycles
IEC 60255-21-1	Vibration	Tests Fc	2g @ (10 - 150) Hz	Class 2
IEC 60255-21-2	Shock	Tests Ea	30g @ 11mS	Class 2

Notes: 1. Class 2 refers to "Measuring relays and protection equipment for which a very high security margin is required or where the vibration levels are very high, ( e.g. shipboard application and for severe transportation conditions")

www.RuggedCom.com RuggedVDSLTM RS930L 6