Runco 53SBX59B, 61SBX59B Exit button, Recall button, MENU, Cursor buttons, Channel Skip button

HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV

EXIT button

When in MENU mode, this button will exit all On-Screen Displays.

RECALL button

Press this button when no menu is displayed when you want to check the channel being received, the picture source, if the channel has stereo (ST) or second audio program (SAP), the time, CHANNEL ID, if the Channel Skip (C.S.) function is activated, if SPECIAL EVENT REMINDER is set, and if the SLEEP timer is set.

Audio Selected Main Picture Source

Audio			CHANNEL ID
Broadcast	STEREO	ANT A 10
	ST/SA	ABCD	Time
		10:00PM
		PIP ANT A 12	Sub-Picture
Channel	SKIP (C.S.)		Source
Skip
			PIP
SLEEP
	SLEEP 0:15
TIMER			SPECIAL
			EVENT
			REMINDER

S - IN: 1

Y - CBCR: 2

When an S-Video Input is connected to Video: 1.

When a COMPONENT: Y-CBCRInput is

connected to Video: 2.

MENU, CURSOR buttons

All the On-Screen Display features can be set or adjusted by using these buttons.

The MENU button will start the On-Screen Display.

The CURSOR buttons will highlight functions or adjust and set different features.

CHANNEL SKIP button

Press this button repeatedly to select channel skip time (30~180 seconds) when no menu is displayed and the TV will tune to the last channel viewed when the selected time is up. The user can change stations SURF to any station they wish, and after selected time seconds, TV will tune back to the original channel.

SLEEP button

Press this button to display the sleep timer in the lower left corner of the screen. Every subsequent press of this button will add 15 minutes to this timer, up to a maximum of three hours. Once set, use RECALL when you want to view time remaining. If the SLEEP button is pressed while the timer is set, it will reset to the original condition.

INPUT button

The INPUT button will select between both antenna signals and the three sets of video input jacks each time the button is pressed. If the Picture-in-Picture is on, the INPUT button will select between the three sets of video input jacks and both antenna sources when main channel is chosen with the PIP CH button. If the sub-picture is chosen, the INPUT button will select between the three sets of video input jacks and the ANT A antenna source (ANT B source cannot be displayed as a PIP sub-picture and COMPONENT: Y-CBCRInput 2 source will be displayed as a blank PIP Sub picture.)

ANT A 28

INPUT

S - IN: 1

INPUT

Y - CBCR: 2

INPUT ANT B 13

S - IN: 3

INPUT

INPUT

26