Runco CL-810 CL-810 Ultra Cl-810 CineWide CL-810 / SDC-1 Power switch

Installation

28 Runco CL-810 Series Owner’s Operating Manual

PRELIMINARY

Connecting 12-Volt

Trigger Output to External

Theater Components

If your CL-810 is equipped with a CineWide with AutoScope system, or if your home

theater contains other devices that respond to 12-volt triggers (such as a retractable

screen or screen mask), connect it to the 12-volt trigger output as shown in Figure 3-12.

Figure 3-12. Connecting 12-Volt Trigger Outputs

Connecting to AC Power The CL-810 ships with various types of AC power cords. Choose the one that is

appropriate to your locale.

Plug the female end of the power cord into the AC receptacle on the rear of the projector

(AC 100V ~ 240V). Then, connect the other end to your AC power source.

➤

S-VID /

S-VID

to CineWide with AutoScope

system or other home

theater components

(screen, screen mask etc.)

➤

Powerswitch