Runco CL-810 CL-810 Ultra Cl-810 CineWide CL-810 / SDC-1

Operation

34 Runco CL-810 Series Owner’s Operating Manual

PRELIMINARY

Although it may be possible to obtain satisfactory picture quality using the naked eye and

regular program material, Runco recommends using the following calibration tools for best

results:

• External test pattern source -- Sencore VP401 Multimedia Video Generator, Ovation

Multimedia test DVD or equivalent.

• A blue filter (provided with many test DVDs), for color level and tint adjustments.

Connect your test pattern source to the input that you are calibrating and proceed as

follows. Perform the adjustments in the order listed here.

Brightness: On your external test pattern source, select a PLUGE pattern. (PLUGE is an

acronym for “Picture Line-Up Generation Equipment.”) Figure 4-2 shows a typical PLUGE

pattern.

Figure 4-2. Typical PLUGE Pattern for Adjusting Brightness

PLUGE patterns vary but generally consist of some combination of black, white and gray

areas against a black background. The example above includes two vertical bars and four

shaded boxes.

Select Brightness from the Adjustment menu and press ENTER. Adjust the brightness so

that:

• The darkest black bars disappear into the background.

• The dark gray areas are barely visible.

• The lighter gray areas are clearly visible.

• The white areas are a comfortable level of true white.

• The image contains only black, gray and white (no color).

Below Black

bove Black