Installation
24 Runco CL-810 Series Owner’s Operating Manual
PRELIMINARY
Connecting Source
Components to the
CL-810
If your installation does not include an SDC-1: Connect your video sources to the
CL-810 as shown and described in the sections that follow.
HDMI/DVI Connections: See Figure 3-7. With an HDMI source, use the included
HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable.
Figure 3-7. HDMI/DVI Source Connections
➤
Use the HDMI input whenever possible. This ensures the highest
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
Tip