Installation

3.3 Installation Considerations

Special Requirements for the XP-103DHD

High-Altitude Operation

Mounting the PlasmaWall

on a Wall or Table

Stand/Floor Pedestal

Proper installation of your PlasmaWall will ensure the highest possible picture quality. Whether you are installing the PlasmaWall temporarily or permanently, you should take the following into account to ensure that it performs optimally.

The extremely large size and high power consumption of the XP-103DHD place unique demands upon both the installation personnel and the installation site, over and above those of the 50-inch and 65-inch PlasmaWall models.

Installing the XP-103DHD requires the following:

Several people familiar with complex mechanical installations.

Specialized equipment.

A dedicated 220VAC circuit.

A “carry-in” path with sufficient clearances.

An installation location that can support the weight of both the plasma panel and mounting hardware (floor pedestal or wall mount).

These and other installation requirements are detailed in a document called Runco XP-103DHD Installation Site Pre-Qualification,available from your Runco dealer or representative, or from www.Runco.com. Before proceeding with an XP-103DHD installation, obtain, read and make sure you understand everything in this document.

Due to the design of all plasma glass panels made by every manufacturer, and the interaction between ambient air pressure and the plasma gases contained inside of the panel, reliable operation of your plasma display cannot be assured during operation at certain high-altitude locations.

Runco has found the XP-50DHD, XP-65DHD and XP-103DHD to operate reliably at altitudes of up to 7,800 feet MSL (mean sea level).

The XP-50DHDxa and XP-65DHDxa have been found to operate reliably at altitudes of up to 9,100 feet MSL.

At higher elevations, each panel may react differently, depending upon the altitude, air pressure, humidity and other meteorological factors. If you are planning to use this product at a location above 9,000 feet, please contact Runco technical support for further information.

To install the PlasmaWall, you will need either an optional table stand, floor pedestal or wall-mounting kit. (The XP-103DHD must be either wall-mounted or attached to a floor pedestal.)

If you do decide to wall-mount the PlasmaWall, ensure that the wall-mount bracket is installed according to the instructions included with it. The wall must be capable of supporting a redundant weight factor five (5) times the weight of the display, or be reinforced.

Runco recommends that this be done by a custom installation specialist.

Use only a Runco-approved wall-mount kit, table stand or floor

Note pedestal that is specifically designed for your display. Refer to

Parts List on page 4 for ordering information.

18

PlasmaWall XP Series Owner’s Operating Manual

Page 30
Image 30
Runco High Definition manual Installation Considerations

High Definition specifications

Runco High Definition displays have made a significant impact in the realm of home theater and professional projection systems. Renowned for their exceptional image quality and advanced technology, Runco has set a high standard for visual performance in both consumer and commercial applications.

One of the standout features of Runco High Definition displays is their proprietary video processing technology. Runco’s Simple Theatre technology ensures that the content being viewed is delivered with accuracy and clarity. This technology adapts the picture quality based on the source material, whether it is a Blu-ray disc, streaming content, or television broadcasting. The result is a consistently high-quality viewing experience that enhances every pixel on the screen.

Another defining characteristic of Runco High Definition displays is their use of advanced optics. With high-quality lenses and light engines, Runco projectors are capable of producing vibrant colors and deep blacks, which are essential for an immersive viewing experience. Their use of cutting-edge color correction techniques also allows for a wider color gamut, ensuring that images are not only lifelike but also rich in detail.

Runco High Definition displays are also known for their customization options. The company offers a range of configurations and setups to suit different environments and preferences. Whether it’s the installation of a fixed screen in a dedicated home theater or a portable solution for business presentations, Runco provides flexibility and versatility.

In terms of connecting with other devices, Runco displays come equipped with various inputs, including HDMI, which supports high-definition audio and video. This allows users to easily connect their favorite devices, such as gaming consoles and streaming media players, while maintaining the highest quality of signal transmission.

Furthermore, Runco prioritizes build quality and design. Their displays are crafted with durability in mind, allowing them to withstand the demands of professional and home use. The aesthetic appeal of Runco products also makes them a stylish addition to any room.

In summary, Runco High Definition displays are characterized by advanced video processing, high-quality optics, customization options, versatile connectivity, and durable design. These features come together to deliver unparalleled visual performance, making Runco a preferred choice for enthusiasts and professionals alike.