Runco Reflection manual PC & HD Adjust

On-Screen Display Menus

PC & HD Adjust ➤

Press Enter to display the PC & HD Adjust menu. Use these settings to fine-tune 480p and higher-resolution signals for optimum picture quality.

•Auto: Adjusts the phase, frequency and position automatically.

•Freq.: Adjusts the frequency of the signal.

•Phase: Adjusts the phase of the input signal (similar to tracking on a VCR).

•H. Pos.: Adjusts the horizontal position of the image.

•V. Pos.: Adjusts the vertical position of the image.

NOTE: To adjust the image position with a 480i source, use the Image Shift controls in the Set Up menu, described on page 41.

PC & HD Adjust

Auto Yes?

Freq. 0

Phase +10

H.Pos. 0

V.Pos.0

PIP / PBP Set Up ➤

Press the ▲ or ▼ arrows to select PIP/PBP Enable, then press Enter. Press the ▲ or ▼ arrows to select Off or On, then press Enter.

PIP/PBP Set Up
PIP/PBP Enable	PIP/PBP Enable
PIP Set Up	Off
PBP Set Up	On

PIP Set Up ➤ Press the ▲ or ▼ arrows to select PIP Set Up, then press Enter.

Press the ▲ or ▼ arrows to select PIP Off, Graphic in Video or Video in Graphic, then press Enter.

PIP/PBP Set Up

PIP/PBP Enable

PIP Set Up

PBP Set Up

PIP Set Up PIP Off

Graphic in Video Video in Graphic

PBP Set Up ➤ Press the ▲ or ▼ arrows to select PBP Set Up, then press Enter.

Press the ▲ or ▼ arrows to select PBP Off, Graphic by Video or Video by Graphic, then press Enter.

PIP/PBP Set Up

PIP/PBP Enable PIP Set Up

PBP Set Up

PBP Set Up

PBP Off Graphic by Video Video by Graphic

DNR ➤ Press the ◄ or ► arrows to adjust the Digital Noise Reduction (DNR). DNR is useful for clearing up noisy RGB images such as those from a PC. Adjust as desired, keeping in mind that reducing noise (which reduces high frequencies) may also soften the image.

- + 0

38 Runco CL-610 Owner’s Operating Manual