Runco Reflection manual Ntsc

On-Screen Display Menus

ICC Adjust ➤ Use the ICC Adjust controls to customize the stored NTSC, HDTV and/or PAL color characteristics. To do this, select the color space to modify. Then, select a component color (Red, Green, Blue, Yellow, Cyan or Magenta).

For each component color, you can adjust the following:

Intensity: This slidebar adjusts the intensity -- also known as luminance -- of a given color.

Sat.: This slidebar adjusts the color saturation level -- the amount of that color in a video image. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.

Hue: This slidebar adjusts the red/green color hue for true color reproduction of video signals. For best results, adjust tint while displaying an external color bars test pattern. Otherwise, it is recommended that Hue remain at its default setting.

When you have finished customizing the color space, select Store Setting and press Enter.

Store Settings ➤ When you have finished calibration, select Store Image Settings and choose “Memory 1,” “ISF Night“ or “ISF Day” to store your settings.

To recall stored custom image quality settings, select Restore Image Settings from the Adjustment menu (refer to “Picture Quality Adjustments,” earlier in this section) and choose “Memory 1,” “ISF Night“ or “ISF Day.” Or, simply use the corresponding buttons on the remote control.

ICC Adjust

Color		NTSC
R G B Y C M
Intensity		+100
Sat.		+100
Hue	M	C 0

Store Setting

Store Settings

Memory 1

ISF Night

ISF Day

Splash Screen Timer ➤ Press the ◄ or ► arrows to set the Splash Screen Timer. This timer controls how long the startup (ISF and Runco

logo) image stays on-screen after you turn on the projector. Select from 5 to 60 seconds, in 1-second increments. When finished, press Exit.

Splash Screen Timer

+20 - +

ISF Enable ➤ Use ISF Enable to control the display of the ISF logo on

the CL-610 splash screen upon power-up.

ISF Enable

>Off On

44 Runco CL-610 Owner’s Operating Manual