In order to understand whether or not the amount of softener salt in your machine is sufficient, check the transparent section on the salt compartment cap. There is sufficient salt if the transparent section is green. Salt has to be added if the transparent section is not green.
Testing strip
The washing effectiveness of your machine depends on the softness of the tap water. For this reason, your machine is equipped with a system that reduces the hardness in mains water supply. The washing effectiveness will increase when the system is correctly set. To find out the water hardness level of water in your area, contact your local water board or determine water hardness level by using the test strip(if available).
Open the | Run | Keep the | Shake the | Wait for | Make your machine’s water hardness |
testing | water | testing | testing strip | 1 min. | setting according to the result obtained |
strip. | through | strip in | after taking it |
| through the testing strip. |
| your tap | water for 1 | out of water. |
|
|
| for 1 | sec. |
|
|
|
| min. |
|
|
|
|
Adjusting salt consumption
Table of Water Hardness Level Settings
If the hardness of the water you use is above 90 dF (French hardness) or if you are using well water; you are recommended to use filter and water refinement devices.
NOTE: Hardness level is adjusted to level 3 as a factory setting.
12
