Washing procedure & programme selection
Programme selection
Switching on the machine
To switch on the machine, press the On/Off button
Selecting a programme
To select a programme, turn the programme dial to the desired position.
Monitor the wash cycle
You can monitor the progress of the wash cycle by using the programme follow up bulbs. While the programme is running, the top light will illuminate. Once the programme has finished, the bottom light will illuminate.
Changing a programme
To reselect a programme during a cycle, press the Play/Pause button once. Wait until the cycle has stopped. This will allow you to reselect a different cycle using the instructions above. The cycle will continue from the point it was stopped at, but will continue as a cycle in the new selected programme.
Resetting during a cycle
To reset the machine during a cycle to allow you to reselect a programme from the start, press the Start/Pause button once. Turn the programme dial to the Reset position. Press the Start/Pause button once and wait 30 seconds for the water to be drained from the machine. Once the End light is illuminated, you can reselect a new cycle.
Switching the machine off
To switch the machine off after a cycle, wait until the End light is illuminated. Then press the ‘On/Off’ button.
Important note
If the machine door is opened during a cycle, the power is cut. Once the door is closed, the programme will continue. Users should not open the door during a cycle as this can result in burn injuries.
If the power is cut during a cycle, the programme is terminated. The machine will be ready to select a new cycle.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
21
