BEHAVIOR OF LEDS
Activity LED (for BGDA and BGCA)
Solid off - no Home Plug network activity detected.
Off, periodically blinks on - No home Plug network received. The device is transmitting Home Plug packets.
Solid on - Home Plug network traffic was received, but there is currently no Home Plug network traffic.
On, periodically blinks off - HomePlug network traffic was received, and there is currently communication (either transmit or receive) on the Home Plug network.
Binding LED (for BGDA and BGCA)
Solid off - Not bound to another device. This is the default state before binding, and can be reset to this state by holding the binding push button down for 10 seconds. In this state, the device is communicating with the standard "HomePlug" password, and can then be upgraded using upgrade software and a HomePlug Ethernet bridge.
Blinking - Pressing the binding push button will cause the device to enter the binding process. After this, the LED will either slow or fast blink depending on if the device was the first device to join the network.
Fast blink - attempting to bind to another device.
Slow blink - waiting for another unit to bind to this device. This may be a newly created network, if this device was not already bound to another device.
Solid on - the device has been bound to another device.
Docked LED
BGDA solid off - No iPod is inserted in the Dock.
BGCA solid off - cannot detect an iPod attached to the remote BGDA. This could either be the case where there is no iPod docked, or the iPod is docked and something is preventing the devices from connection (check binding, and if iPod is correctly inserted in the Dock.
BGDA solid on - an iPod is inserted in the Dock.
BGCA solid on - an iPod is connected to the BGDA, and the BGDA is communicating with the BGCA.
BGDA LEDs on front panel
BGCA LEDs on front panel
10 | Russound BGK3 iBridge Power Dock Kit Installation Manual |
