Russound DPA-1.2 instruction manual Contents

14.Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

15.Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through the openings.

16.Damage Requiring Service - The appli- ance should be serviced by qualified service personnel when:

A.The power - supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the appliance; or

C.The appliance has been exposed to rain; or

D.The appliance does not appear to operate normally; or

E.The appliance has been dropped or the enclosure is damaged.

17.Servicing - The user should not attempt to service the appliance beyond that described in the operat- ing instructions. All other servicing should be referred to qualified service personnel.

18.Avoid using a telephone (other than cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

19.Do not use the telephone to report a gas leak near the leak.

Precautions

1.Do Not Touch The DPA-1.2 With Wet Hands. Do not handle the DPA-1.2 or power cord when your hands are wet or damp. If water or any other liquid enters the DPA-1.2 cabinet, take the DPA-1.2 to qualified service personal for inspection.

2.Location of the DPA-1.2 - Do not expose the DPA-1.2 to direct sun light or heating units as the DPA-1.2 inter- nal components temperature may rise and shorten the life of the compo- nents. Avoid damp and dusty places.

3.Care – From time to time you should wipe off the front and side panels and the cabinet with a soft cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since this may damage the finish or remove the panel lettering.

Conforms to

UL 6500

Certified to CSA

C22.2 Nol-94

RussoundDPA-1.2

Tested to Comply

with FCC Standards

FOR HOME OR OFFICE USE

Contents

1. Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Possible System Configuration . . . . . . . . . . . . . . . . . . . 4

4. Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5. Back Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . 6

6. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3