Russound DPA-1.2 instruction manual Includes detachable 2 terminal power cord

AC 120V 60Hz 2A~

12V TRIG

OUT 100mA

12V

TRIG

INPUT

12-Volt Trigger In and Out: The Trigger output is 12 volts at a maximum of

100mA. This can be used to drive a relay- operated AC outlet or other 12-volt

triggered devices. The 12-volt trigger

input is used to activate the DPA-1.2 independently from the auto turn on sensing circuit, in which case the delay, video and audio sensing are bypassed.

Delay Time: The delay timecan be adjusted from about

0.3 minutes to 8 minutes. The DPA-1.2 amplifier will	DELAY
	5	1
automatically switch to the default input signal after the	4	2
delay setting. (When set between 4 and 5, defeats delay		3

setting). When the audio or video source is no longer

playing, the DPA-1.2 will switch back to the default input after the set delay time.

Power: The DPA-1.2 is set at the factory for operation of either 120 VAC 60Hz or

230 VAC 50Hz. Please reference the voltage rating on the back panel.

Includes detachable 2 terminal power cord.

8