START UP
OPTIONS & STATUS CONFIGURATION
INSTALLER OPTIONS
STREAM NAMES
The SMS3’s three streams are pre-named Stream 1, Stream 2 and Stream 3. These names can be edited from this page. Select the window next to the stream name # and enter the new name using the name entry field.
Note: If used with an RNET-enabled system, changes to the SMS3 stream names appear within the graphical user interface only and DO NOT show up on the UNO keypads. UNO keypads display only source names assigned through the RNET system. To eliminate confusion, it is recommended to match the CAV/CAM source names with the media server’s stream names.
RNET SOURCE NUMBERS
When the SMS3 is used in an RNET-enabled system, the three streams are associated with source numbers within the RNET system. The SMS3’s streams are pre-configured: Stream 1=Source 3, Stream 2=Source 4, Stream 3=Source 5. These can be reassigned here, but must also be reas- signed through the RNET system. For a non-RNET system, or RNET systems that are not using all three streams, the “No RNET Source” selection is available.
