INSTALLATION

Power

After making the audio connections, make sure the voltage switch on the back of the SUB85 is set to the correct voltage for your area. Insert one end of the power cable into the IEC receptacle next to the voltage switch and the other end into a live power receptacle.

Slide the power switch to the Auto setting to place the

 

SUB85 in standby mode or the On setting to place it in

 

full on mode. The power indicator on the front panel

 

will light up amber when the SUB85 is in standby mode

 

and green when fully on.

Power receptacle and voltage switch

Power switch and audio controls

Adjustments

Crossover frequency

Set the crossover frequency to match the low-frequency roll-off point of the main speakers. If you don’t know the roll-off point, use the following guidelines:

•For main speakers with a full frequency range, set the crossover between 50 and 80 Hz.

•For main speakers with limited bass extension, set the crossover between 80 and 100 Hz.

•For main speakers that reproduce only midrange and high frequencies, set the crossover between 100 and 200 Hz.

Your receiver or processor may have a bass management feature with settings for large, medium, and small main speakers. Refer to your equipment manual to determine the appropriate crossover setting if you use this feature.

The goal is to set the crossover frequency at the point where the subwoofer reproduces the low frequencies

not reproduced by the main speakers, with very little overlap and no gaps in the overall response of the system. To make this adjustment precisely, you can use a calibration CD or DVD and a sound-level meter.

Volume

Start with the volume set at minimum, raising it gradu- ally until output from the SUB85 sounds about the same volume as output from the main speakers. Again, you can use a sound-level meter to be precise.

Phase

Depending on the location of the SUB85, its output at certain frequencies may be out of phase with the output of the main speakers. This is especially true when the subwoofer and main speakers are very different distances from the listeners.

To compensate for this, try setting the phase switch at both positions. You may find that one position provides smoother bass response than the other.

8

Page 7 Page 9
Page 8
Image 8
Russound SUB85 instruction manual Power, Adjustments, Crossover frequency, Volume, Phase
Page 7 Page 9

SUB85 specifications

The Russound SUB85 is a powerful and efficient subwoofer designed to enhance the audio experience in home theaters and music systems. With its robust engineering and thoughtful design, the SUB85 delivers deep, rich bass that resonates throughout a room, providing a fuller soundstage for music enthusiasts and movie lovers alike.

One of the main features of the SUB85 is its 8-inch cone driver, which is crafted to provide impactful bass response while maintaining clarity at higher volumes. The driver is housed in a sturdy enclosure that is specifically designed to minimize distortion and maximize bass performance. This allows the subwoofer to reproduce low frequencies with precision, enhancing the overall listening experience.

The SUB85 utilizes advanced technologies to deliver exceptional sound quality. It features a built-in high-efficiency amplifier that provides ample power to drive the speaker effectively, producing a maximum output of 150 watts. The amplifier is coupled with a sophisticated digital signal processor (DSP) that ensures optimal sound reproduction across all frequency ranges, allowing for crystal-clear audio even in complex soundscapes.

Another notable feature of the Russound SUB85 is its adjustable crossover frequency, which allows users to tailor the subwoofer’s performance to match the specific needs of their audio system. This customization ensures that the SUB85 can seamlessly blend with satellite speakers, providing a cohesive sound experience. Users can also adjust the phase control, allowing for further fine-tuning of the bass response based on room dynamics.

The subwoofer is designed with versatility in mind, featuring multiple input options including stereo RCA and speaker-level connections. This compatibility makes it easy to integrate the SUB85 into virtually any audio system, whether it’s a standalone setup or part of a larger multi-channel home theater configuration.

The aesthetic design of the Russound SUB85 is also worth mentioning. With a modern finish and a compact footprint, it can fit easily into various room settings, providing both functionality and style.

In summary, the Russound SUB85 is an excellent choice for anyone looking to enhance their audio experience with powerful, adjustable, and high-quality bass performance. Its combination of advanced technologies, user-friendly features, and sleek design make it a standout subwoofer for music and home theater enthusiasts alike.
Top Page Image Contents