ASSEMBLY INSTRUCTIONS

3. Install a screw into the hole from the bottom of the cutting attachment shield and screw it into the nut installed in step #2 (Fig 6). Do not tighten.

4. Repeat steps 2 and 3 until all three screws have been started, then tighten securely.

Screws

Fig. 6

OIL AND FUEL INFORMATION

OIL AND FUEL MIXING INSTRUCTIONS

Old and/or improperly mixed fuel are the main reasons for the unit not running properly. Be sure to use fresh, clean unleaded fuel. Follow the instructions carefully for the proper fuel/oil mixture.

Definition of Blended Fuels

Today's fuels are often a blend of gasoline and oxygenates such as ethanol, methanol or MTBE (ether). Alcohol-blended fuel absorbs water. As little as 1% water in the fuel can make fuel and oil separate. It forms acids when stored. When using alcohol-blended fuel, use fresh fuel (less than 60 days old).

Using Blended Fuels

If you choose to use a blended fuel, or its use is unavoidable, follow recommended precautions.

Always use fresh fuel mix per your operator's manual.

Use the fuel additive STA-BIL®or an equivalent.

Always agitate the fuel mix before fueling the unit.

Drain the tank and run the engine dry before storing the unit.

Using Fuel Additives

The use of fuel additive, such as STA-BIL®Gas Stabilizer or an equivalent, will inhibit corrosion and minimize the formation of gum deposits. Using a fuel additive can keep fuel from forming harmful deposits in the carburetor for up to six (6) months. Add 0.8 oz.

(23 ml.) of fuel additive per gallon of fuel according to the instructions on the container. NEVER add fuel additives directly to the unit's fuel tank.

CAUTION: For proper engine operation and maximum reliability, pay strict attention to the oil and fuel mixing instructions on the 2-cycle oil container. Using improperly mixed fuel can severely damage the engine.

Thoroughly mix the proper ratio of 2-cycle engine oil with unleaded gasoline in a separate fuel can. Use a 32:1 fuel/oil ratio. Do not mix them directly in the engine fuel tank. See the table below for specific gas and oil mixing ratios.

NOTE: One gallon (3.8 liters) of unleaded gasoline mixed with one 4 oz. (120 ml.) bottle of RYOBI 2 CYCLE OIL makes a 32:1 fuel/oil ratio.

+

UNLEADED GAS

RYOBI 2 CYCLE OIL

 

1 US. GALLON + 4.0 FL. OZ.

(3.8 LITERS)

(120 ml)

1 LITER + 30 ml

MIXING RATIO - 32:1

WARNING: Gasoline is extremely flammable. Ignited Vapors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the area.

WARNING: Remove fuel cap slowly to avoid injury from fuel spray. Never operate the unit without the fuel cap securely in place.

WARNING: Add fuel in a clean, well ventilated area outdoors. Wipe up any spilled fuel immediately. Avoid creating a source of ignition for spilt fuel. Do not start the engine until fuel vapors dissipate.

NOTE: Dispose of the old fuel/oil mix in accordance to Federal, State, and Local regulations.

9

Page 9
Image 9
Ryobi 767rj OIL and Fuel Information, OIL and Fuel Mixing Instructions, Definition of Blended Fuels, Using Blended Fuels

767rj specifications

The Ryobi 767RJ is a versatile and highly efficient piece of outdoor equipment designed to meet the needs of both homeowners and professional landscapers. This powerful multi-tool boasts an array of features and advanced technologies that make it an essential addition to any gardening or yard maintenance arsenal.

One of the standout characteristics of the Ryobi 767RJ is its potent 2-stroke engine. This engine is designed for optimal performance, allowing users to tackle a wide range of tasks with ease. Whether you're trimming hedges, clearing weeds, or maintaining pathways, the reliable power of the 767RJ ensures that you can accomplish your gardening goals efficiently.

The Ryobi 767RJ includes a quick-change attachment system, making it incredibly adaptable to various jobs. The multi-tool comes with numerous attachments, such as a trimmer head, a brush cutter, and a hedge trimmer, enabling users to switch from one task to another seamlessly. This flexibility eliminates the need for multiple machines, saving both time and money.

But ease of use doesn’t stop there. The telescoping shaft of the Ryobi 767RJ allows users to adjust the length of the tool, providing greater comfort and accessibility. This feature is particularly useful when working in tight spaces or when tackling tall hedges. Additionally, the dynamic anti-vibration system minimizes user fatigue, making extended periods of operation more manageable.

Durability is another hallmark of the Ryobi 767RJ. It is constructed with robust materials that can withstand the rigors of outdoor use, ensuring a long lifespan. Furthermore, the lightweight design enhances maneuverability, allowing users to work for extended periods without the strain that heavier tools might impose.

Convenience features, such as an easy-to-reach start mechanism and on-board storage for attachments, enhance the user experience. The Ryobi 767RJ is not just about raw power; it's designed with the user’s comfort and efficiency in mind.

In summary, the Ryobi 767RJ multi-tool stands out due to its powerful 2-stroke engine, quick-change attachments, ergonomic design, and durability. It's a comprehensive solution for anyone looking to maintain their outdoor spaces with professionalism and ease. Whether you are a DIY enthusiast or a seasoned professional, the Ryobi 767RJ delivers reliable performance that can meet your landscaping needs.