TOOLS NEEDED
The following tools (not included) are needed for checking adjustments of your saw or for installing the blade: Combination Square
Phillips Screwdriver
COMBINATION
SQUARE
PHILLIPS SCREWDRIVER
Fig. 3
LOOSE PARTS LIST
Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.
Hex Key, 4 mm | 1 |
Rip Fence | 1 |
Miter Gauge | 1 |
Saw Table | 1 |
Wing Screw | 1 |
Wing Nut | 1 |
Table Aligning Bolt | 1 |
Flat Head Screw | 3 |
Worklight | 1 |
Washer | 1 |
Switch Key | 1 |
Operator’s Manual (not shown) | 1 |
WORKLIGHT |
|
SWITCH |
|
KEY | MITER GAUGE |
| SAW TABLE |
| RIP FENCE | WING NUT |
|
| |
|
| FLAT HEAD SCREW |
| WING SCREW | WASHER |
| TABLE ALIGNING | |
4 mm HEX KEY |
| |
| BOLT |
Fig. 4
Page 10
